Low

FT4232HL-R - 

Interface Bridges, USB to UART, MPSSE, 1.62 V, 1.98 V, LQFP, 64 Pins, -40 °C

FTDI FT4232HL-R

The actual product may differ from image shown

Manufacturer:
FTDI FTDI
Manufacturer Part No:
FT4232HL-R
Newark Part No.:
80P4241
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
USB to UART, MPSSE
:
-40°C
:
-
:
Cut Tape
:
85°C
:
64Pins
:
LQFP
:
1.62V
:
-
:
1.98V
:
MSL 3 - 168 hours
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The FT4232HL-R is a quad high speed USB 2.0 (480Mb/s) to multipurpose UART/MPSSE IC in 64 pin LQFP package. This 5th generation of USB device features four UARTs. Two of these have an option to independently configure an MPSSE engine. This allows FT4232H to operate as two UART/bit-bang ports plus two MPSSE (Multi Protocol Synchronous Serial Engine) engines used to emulate JTAG, SPI, I2C, bit-bang or other synchronous serial modes.
  • Entire USB protocol handled on the chip and no USB specific firmware programming required
  • USB 2.0 high speed (480Mbits/s) and full speed (12Mbits/s) compatible
  • Independent baud rate generators
  • RS232/RS422/RS485 UART transfer data rate up to 12Mbaud
  • Adjustable receive buffer timeout
  • 3.3V single supply operating voltage range
  • USB bulk data transfer mode (512byte packets in high speed mode)
  • UART interface supports 7/8 bit data, 1/2 stop bits and odd/even/mark/space/no parity
  • Low operating and USB suspend current
  • Ambient operating temperature range from -40°C to 85°C

Applications

Communications & Networking, Consumer Electronics, Portable Devices, Industrial

Associated Products

Compare Selected