Low

FT232RQ - 

Interface Bridges, USB to UART, 3.3 V, 5.25 V, QFN, 32 Pins, -40 °C

FTDI FT232RQ
FTDI FT232RQ

The actual product may differ from image shown

Manufacturer:
FTDI FTDI
Manufacturer Part No:
FT232RQ
Newark Part No.:
91K9919
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
USB to UART
:
-40°C
:
-
:
Cut Tape
:
85°C
:
32Pins
:
QFN
:
3.3V
:
-
:
5.25V
:
MSL 3 - 168 hours
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

  • Single chip USB to asynchronous serial data transfer interface
  • Entire USB protocol handled on the chip. No USB specific firmware programming required
  • Fully integrated 1024 bit EEPROM storing device descriptors and CBUS I/O configuration
  • Fully integrated USB termination resistors
  • Fully integrated clock generation with no external crystal required
  • Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232 ) at TTL levels
  • 128 byte receive buffer and 256 byte transmit buffer
  • FTDI royalty-free Virtual Com Port & Direct drivers eliminate requirement for USB driver development
  • Unique USB FTDI Chip-ID feature
  • Configurable CBUS I/O pins
  • Transmit and receive LED drive signals
  • UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd/even/mark/space/no parity
  • FIFO receive and transmit buffers for high data throughput
  • Synchronous and asynchronous bit bang interface options with RD# and WR# strobes
  • Device supplied pre-programmed with unique USB serial number
  • Supports bus powered, self powered and high power bus powered USB configurations
  • Integrated +3.3V level converter for USB I/O
  • Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic
  • True 5V/3.3V/2.8V/1.8V CMOS drive output and TTL input
  • Configurable I/O pin output drive strength

Applications

Communications & Networking, Consumer Electronics, Multimedia, Portable Devices

Associated Products

Compare Selected