Low

FTDI  EVAL232R  Evaluation Module, USB To RS232, LED's to Indicate Serial Data Transfer

Technical Data Sheet (613.51KB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

FTDI EVAL232R
360°

Product Overview

The EVAL232R is a USB to RS232 evaluation module for FT232RL USB to serial UART interface device. The FT232RL is a USB to serial UART interface with optional clock generator output and the new FTDIChip-ID security dongle. In addition, asynchronous and synchronous bit bang interface modes are available. USB to serial interface designs using the FT232RL have been further simplified by fully integrating the external EEPROM, clock circuit and USB resistors onto the device. The FT232RL adds two new functions compared with its predecessors, effectively making it a 3 in 1 chip for some application areas. A unique number (the FTDIChip-ID) is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle which can be used to protect customer application software from being copied. The EVAL232R is supplied on a 61.0mm x 32.0mm PCB. All components used, including the FT232RL and RS232 level converter IC are Pb free (RoHS compliant).
  • Module provides USB to RS232 interface, with additional I/O pin out
  • Entire USB protocol handled on the FT232RL chip, no USB specific firmware programming required
  • UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd/even/mark/space/no parity
  • Fully assisted hardware or X-On/X-Off software handshaking
  • Data transfer rates from 300baud to 1Mbaud at RS232 levels
  • In built support for event characters and line break condition
  • Device supplied preprogrammed with unique USB serial number
  • 5V USB power available to supply external devices
  • USB 2.0 full speed compatible
  • Low operating and USB suspend current

 

Product Information

Silicon Manufacturer:
FTDI
Silicon Core Number:
i.MX6
Kit Application Type:
Interface
Application Sub Type:
USB to RS232
Kit Contents:
Board Only
Product Range:
-
Features:
Adjustable Receive Buffer Timeout, Transmit and Receive LED's to Indicate Serial Data Transfer
SVHC:
To Be Advised

Find similar products  grouped by common attribute

Applications

  • Communications & Networking;
  • Audio;
  • Imaging, Video & Vision;
  • Consumer Electronics;
  • Portable Devices;
  • Sensing & Instrumentation;
  • Industrial;
  • Wireless

Legislation and Environmental

Substitutes

Associated Products

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.