NXP  USBMULTILINKBDME  USB-BDM MULTILINK, DEBUGGER/PROGRAMMER, S08, HCS12, RS08

NXP USBMULTILINKBDME

Image is for illustrative purposes only. Please refer to product description.

  • Manufacturer:
  • Newark Part No.: 83K3802
  • Manufacturer Part No USBMULTILINKBDME

Product Overview


The USB-MultilinkBDME is a USB S08/HCS12 BDM Multilink in-circuit debugger/programmer. It is a easy to use debug and programming interface for NXP's S08, HC(S)12(X), RS08 and ColdFire V1 lines of microprocessors. The USB BDM Multilink is a member of P&E's family of USB Multilink's, which allow the PC to communicate with a target processor through the USB port of the PC. The Multilink controls the microprocessor by accessing the debug port of the target. The Multilink's speed and reliability make it ideal for development. It is supported by P&E software, NXP's CodeWarrior and other third-party software. P&E's flash programmer software can be used with the Multilink to program internal and external flash memory devices. The USB BDM Multilink also works with P&E's in-circuit debugger software to control the target processor's execution, read/write registers and memory and perform full C source level debug.
  • Real-time in-circuit debug through S08/RS08 or HCS12 BDM interface
  • Fast in-circuit flash programming
  • Small unobtrusive size (approximately 3" x 2" x 3/4") supports 1.8 V to 5.5 V S08/RS08s and HCS12s
  • USB to BDM interface
  • Fast, hassle-free USB 2.0 communications interface
  • Multi-voltage support for targets ranging from 1.8 to 5.5 volts
  • Draws power directly from the USB port, no external power supply needed
  • USBMultilinkBDME features Compact size

Applications

Embedded Design & Development; Communications & Networking
Back to top

Product Information


  • Silicon Family Name -
  • Core Architecture ColdFire, HCS08, RS08
  • Core Sub-Architecture ColdFire v1, HCS08, RS08
  • IC Product Type In-Circuit Debugger / Programmer
  • Kit Contents In-Circuit Emulator Debugger Programmer
  • Features Real-Time In-Circuit Debug, Fast In-Circuit Flash Programming
  • Product Range -
  • Series HCS08/HCS12
  • SVHC No SVHC (17-Dec-2014)

Find similar products  grouped by common attribute

View this product in our online catalog


This product also features on the following pages and catalog editions:

  •  131/82
  •  132/83

  •   element14 Technical Page (372.67KB) EN
  • Availability

    Availability: No Longer Manufactured

     
     
    Low

    Legislation and Environmental


    Back to top

    Similar Products

    Customer Reviews


    Customer Q&A Exchange

    (There is 1 question : 1 answer on this product)

    Product Q&A

    Ask your questions. Share your answers.

     
     
    Browse Q&A
     
     
    Search Questions
    Need Product Support?
    If you need immediate technical support use Live Support or Contact Us.
    This space is yours...
    Use this space to Ask your peers product questions or Answer those questions posted by them.
    Details: 
    Please could you provide more information on USBMULTILINKBDME product ?
    2 years, 7 months ago
    by
    NewarkProductEnrichment01
    0points
    0out of 0found this question helpful.
    Was this helpful?(0)(0)

    Answers

    A: 
    Description:
    The USB-MultilinkBDME is a USB S08/HCS12 BDM Multilink in-circuit debugger/programmer. It is a easy to use debug and programming interface for Freescale’s S08, HC(S)12(X), RS08 and ColdFire V1 lines of microprocessors. The USB BDM Multilink is a member of P&E’s family of USB Multilink's, which allow the PC to communicate with a target processor through the USB port of the PC. The Multilink controls the microprocessor by accessing the debug port of the target. The Multilink’s speed and reliability make it ideal for development. It is supported by P&E software, Freescale’s CodeWarrior and other third-party software. P&E’s flash programmer software can be used with the Multilink to program internal and external flash memory devices. The USB BDM Multilink also works with P&E’s in-circuit debugger software to control the target processor’s execution, read/write registers and memory and perform full C source level debug.

    Feature & Benefits:
    Real-time in-circuit debug through S08/RS08 or HCS12 BDM interface
    Fast in-circuit flash programming
    Small unobtrusive size (approximately 3" x 2" x 3/4") supports 1.8 V to 5.5 V S08/RS08s and HCS12s
    USB to BDM interface
    Fast, hassle-free USB 2.0 communications interface
    Multi-voltage support for targets ranging from 1.8 to 5.5 volts
    Draws power directly from the USB port, no external power supply needed
    USBMultilinkBDME features Compact size

    Applications: Embedded Design & development, Communications & Networking
    2 years, 6 months ago
    by
    NewarkProductEnrichment1
    0points
    0out of 0found this answer helpful.
    Was this helpful?(0)(0)
    1 of 1
    • 2015-06-11T15:21:04.670-05:00
    • bvseo_lps, prod_bvqa, vn_prr_5.6
    • cp-1, bvpage1
    • co_hasquestionsanswers
    • loc_en_US, sid_83K3802, prod, sort_default
    1 of 1

    Community

    Like to see information about this product from other customers?

     Read discussions, blogs, documents from our community members.

    Filters:

    Post a question to one of our experts or start a discussion and get responses from supplier experts and fellow engineers in our community.

    Customers Also Bought