NXP  USBMLCF  USB MULTILINK, DEBUG/PROGRAMMER, FOR COLDFIRE V2, V3, V4

NXP USBMLCF

Image is for illustrative purposes only. Please refer to product description.

  • Manufacturer:
  • Newark Part No.: 01M6486
  • Manufacturer Part No USBMLCF

Product Overview


The USBMLCF is a USB ColdFire Multilink. It is a easy to use debug and programming interface for NXP's ColdFire V2/V3/V4 line of microprocessors. The USB ColdFire Multilink is a member of P&E's family of USB Multilink, which allow the PC to communicate with a target processor through the USB port of the PC. The Multilink controls the microprocessor by accessing the background debug mode (BDM) of the target. The USB ColdFire Multilink's speed and reliability make it ideal for development and it is supported by P&E software, NXP's CodeWarrior and other third-party software. The USB ColdFire Multilink also works with P&E's ColdFire In-Circuit debugger to control the target processor's execution, read/write registers and memory and perform full C source-level debug.
  • Compatible with MCF52xx, MCF53xx and MCF54xx families of microcontrollers
  • Synchronous and Asynchronous operation
  • USB 2.0 interface from PC to Multilink allows for fast, easy programming and debugging
  • Draws power from the USB bus, no separate power supply required
  • Fast, hassle-free USB 2.0 communications interface
  • Draws power directly from the USB port. No external power supply needed
  • Multi-voltage support for targets ranging from 1.8 to 5.5 volts
  • USBMLCF features Compact size
  • Works with P&E's debugger and flash programmer, NXP Codewarrior

Applications

Embedded Design & Development; Communications & Networking
Back to top

Product Information


  • Silicon Family Name MCF52xx, MCF53xx, MCF54xx
  • Core Architecture ColdFire
  • Core Sub-Architecture ColdFire v2, ColdFire v3, ColdFire v4
  • IC Product Type Debugger / Programmer
  • Kit Contents Debugger & Programmer Board ColdFire V2/V3/V4
  • Features Synchronous and Asynchronous Operation, Compatible with MCF52xx, MCF53xx MCUs
  • Product Range -
  • SVHC No SVHC (17-Dec-2015)

Find similar products  grouped by common attribute

View this product in our online catalog


This product also features on the following pages and catalog editions:

  •  131/82
  •  132/83

  •   element14 Technical Page (371.85KB) EN
  • Availability

    Availability: No Longer Manufactured

     
     
    Low

    Legislation and Environmental


    Back to top

    Customer Reviews


    Customer Q&A Exchange

    (There is 1 question : 1 answer on this product)

    Product Q&A

    Ask your questions. Share your answers.

     
     
    Browse Q&A
     
     
    Search Questions
    Need Product Support?
    If you need immediate technical support use Live Support or Contact Us.
    This space is yours...
    Use this space to Ask your peers product questions or Answer those questions posted by them.
    2 years, 7 months ago
    by
    NewarkProductEnrichment01
    0points
    0out of 0found this question helpful.
    Was this helpful?(0)(0)

    Answers

    A: 
    Description:
    The USBMLCF is a USB ColdFire Multilink. It is a easy to use debug and programming interface for Freescale’s ColdFire V2/V3/V4 line of microprocessors. The USB ColdFire Multilink is a member of P&E’s family of USB Multilink, which allow the PC to communicate with a target processor through the USB port of the PC. The Multilink controls the microprocessor by accessing the background debug mode (BDM) of the target. The USB ColdFire Multilink’s speed and reliability make it ideal for development and it is supported by P&E software, Freescale's CodeWarrior and other third-party software. The USB ColdFire Multilink also works with P&E’s ColdFire In-Circuit debugger to control the target processor’s execution, read/write registers and memory and perform full C source-level debug.

    Feature & Benefits:
    Compatible with MCF52xx, MCF53xx and MCF54xx families of microcontrollers
    Synchronous and Asynchronous operation
    USB 2.0 interface from PC to Multilink allows for fast, easy programming and debugging
    Draws power from the USB bus, no separate power supply required
    Fast, hassle-free USB 2.0 communications interface
    Draws power directly from the USB port. No external power supply needed
    Multi-voltage support for targets ranging from 1.8 to 5.5 volts
    USBMLCF features Compact size
    Works with P&E's debugger and flash programmer, Freescale Codewarrior

    Applications: Communications & Networking, Embedded Design & development
    2 years, 7 months ago
    by
    NewarkProductEnrichment1
    0points
    0out of 0found this answer helpful.
    Was this helpful?(0)(0)
    1 of 1
    • 2015-06-11T15:20:24.881-05:00
    • bvseo_lps, prod_bvqa, vn_prr_5.6
    • cp-1, bvpage1
    • co_hasquestionsanswers
    • loc_en_US, sid_01M6486, prod, sort_default
    1 of 1

    Community

    Like to see information about this product from other customers?

     Read discussions, blogs, documents from our community members.

    Filters:

    Post a question to one of our experts or start a discussion and get responses from supplier experts and fellow engineers in our community.

    Customers Also Bought