TWR-K60D100M-KIT - 

Tower Module, ARM, Kinetis MCU, 3-axis Accelerometer, 4x cap touch pads

The actual product may differ from image shown

Manufacturer Part No:
Newark Part No.:
Technical Datasheet:
See all Technical Docs

Product Information

Kinetis - K60
4x Brds, DVD, Guide
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The TWR-K60D100M-KIT is a tower system kit for Kinetis MK60DN512VMD10 microcontroller. It can function as a standalone, low cost platform for the evaluation of the Kinetis K10, K20 and K60 family of microcontroller (MCU) devices. The MK60DN512VMD10 is a ARM Cortex‐M4 architecture with USB 2.0 full speed OTG controller and 10/100Mbps Ethernet MAC. The TWR-K60D100M operates as a standalone debug tool and can also be combined and used as part of the modular tower system development platform. An onboard MC9S08JM60 based open source JTAG (OSJTAG) circuit provides a JTAG debug interface to the K60D100M. A standard USB A male to mini B male cable can be used for debugging via the USB connector. The module features a socket that can accept a variety of different tower plug in modules featuring sensors, RF transceivers and more.
  • Integrated open source JTAG via USB
  • SD card slot
  • MMA8451Q three axis accelerometer
  • General purpose tower plug in (TWRPI) socket
  • Touch TWRPI socket adds support for various capacitive touch boards
  • Tower connectivity for access to USB, Ethernet, RS232/RS485, CAN, SPI, I2C, Flexbus
  • Four capacitive touch pads
  • Potentiometer, four LEDs, two push buttons and infrared port
  • Isolation for low power measurements
  • 3.3V or 1.8V operation


Sensing & Instrumentation, Metering, Consumer Electronics, Portable Devices, Wireless, Industrial, Medical, Security, Building Automation, System Monitoring


TWR-K60D100M board, TWR‐ELEV elevator module, TWR‐SER serial module, USB cable, CR 2025 coin cell battery, Quick start guide.

Associated Products

Compare Selected