Low

MVF61NN151CMK50 - 

ARM Microcontroller, Vybrid F Series, ARM Cortex-A5, ARM Cortex-M4, 32bit, 500 MHz, 1.5 MB

NXP MVF61NN151CMK50
Video
Video

The actual product may differ from image shown

Manufacturer:
NXP NXP
Manufacturer Part No:
MVF61NN151CMK50
Newark Part No.:
96W1289
Product Range
ARM Cortex-M4 Microcontrollers
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
141I/O's
:
32bit
:
500MHz
:
Each
:
364Pins
:
ARM Cortex-A5, ARM Cortex-M4
:
CAN, ENET, I2C, SPI, UART, USB
:
MAPBGA
:
3V
:
-
:
ARM Cortex-M4 Microcontrollers
:
3.6V
:
1.5MB
:
MSL 3 - 168 hours
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The MVF61NN151CMK50 is a Vybrid VF6xx series 32-bit Microcontroller based on dual-core ARM Cortex-A5 and Cortex-M4 operates at a maximum frequency of 500MHz. The device incorporates 1MB on-chip SRAM, six universal asynchronous receivers/transmitters (UART)/serial communications interface (SCI) with LIN, ISO7816, IrDA and hardware flow control, four deserial serial peripheral interface (DSPI), four inter-integrated circuit (I2C) with SMBUS support, dual USB OTG controller + PHY, dual 4/8 bit secure digital host controller, dual 10/100 Ethernet with L2 Switch (IEEE 1588) and dual FlexCAN3. Vybrid devices also provide a powerful combination of on-chip encryption, secure boot, anti-tamper and anti-clone capabilities to secure sensitive or critical infrastructure applications.
  • 32KB/32KB I/D L1 Cache
  • 1.6 DMIPS/MHz based on ARMv7 architecture
  • NEON™ MPE (media processing engine) Coprocessor
  • Double precision floating point unit
  • 167MHz ARM Cortex M4 1.25 DMIPS/MHz based on ARMv7 architecture
  • 24MHz and 32kHz Crystal oscillator
  • Internal reference clocks (128KHz and 24MHz)
  • Phase locked loops (PLLs)
  • Low jitter digital PLLs
  • Various stop, wait and run modes
  • Peripheral clock enable register
  • Low voltage warning and detect with selectable trip points
  • Illegal opcode and illegal address detection
  • Hardware CRC module to support fast cyclic redundancy checks (CRC)
  • 128-bit Unique chip identifier
  • Hardware watchdog
  • External watchdog monitor (EWM)
  • Dual DMA controller with 32 channels (with DMAMUX)
  • Debug - standard JTAG, 16-bit trace port
  • Motor control/general purpose timer (FTM)

Applications

Industrial, Automation & Process Control, Motor Drive & Control, Power Management, Wireless, Communications & Networking