Low

NXP  MMA8652FCR1  MEMS Accelerometer, 3-Axis, Digital, X, Y, Z, ± 2g, ± 4g, ± 8g, 1.95 V, 3.6 V, DFN

NXP MMA8652FCR1
Technical Data Sheet (491.29KB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

Product Overview

The MMA8652FCR1 is a 12-bit Accelerometer features industry leading performance. This accelerometer is packed with embedded functions that include flexible user-programmable options and two configurable interrupt pins. Overall power savings is achieved through inertial wake-up interrupt signals that monitor events and remain in a low-power mode during periods of inactivity.
  • 1mg per LSB High sensitivity
  • Low noise - 150 micro g per root hertz (independent of resolution)
  • 7μA Low-power mode
  • 1.62 to 3.6V Interrupt and IIC interface supply
  • 1.5 to 800Hz Output data rate
ESD sensitive device, take proper precaution while handling the device, device is sensitive to mechanical shock, improper handling can cause permanent damage of part or cause part to otherwise fail.

 

Product Information

MEMS Sensor Output:
Digital
Measurement Axis:
X, Y, Z
Acceleration Range:
± 2g, ± 4g, ± 8g
Supply Voltage Min:
1.95V
Supply Voltage Max:
3.6V
Sensor Case Style:
DFN
No. of Pins:
10Pins
Sensitivity Typ:
1024 LSB/g, 512LSB/g, 256LSB/g
Sensitivity Min:
Sensitivity Max:
Packaging:
Cut Tape
Product Range:
-
MSL:
MSL 1 - Unlimited
SVHC:
No SVHC (17-Dec-2015)

Find similar products  grouped by common attribute

Applications

  • Sensing & Instrumentation;
  • Consumer Electronics

Legislation and Environmental

Moisture Sensitivity Level:
MSL 1 - Unlimited
RoHS Compliant:
Y-Ex

Substitutes

Associated Products

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.