Low

MK10FN1M0VLQ12 - 

ARM Microcontroller, K1 Baseline Series, ARM Cortex-M4, 32bit, 120 MHz, 1 MB, 128 KB, 144 Pins

NXP MK10FN1M0VLQ12

The actual product may differ from image shown

Manufacturer:
NXP NXP
Manufacturer Part No:
MK10FN1M0VLQ12
Newark Part No.:
89T6157
Product Range
Kinetis ARM Cortex-M4 Microcontrollers
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
104I/O's
:
32bit
:
120MHz
:
Each
:
144Pins
:
ARM Cortex-M4
:
CAN, I2C, I2S, SPI, UART
:
LQFP
:
1.71V
:
1MB
:
Kinetis ARM Cortex-M4 Microcontrollers
:
3.6V
:
128KB
:
MSL 3 - 168 hours
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The MK10FN1M0VLQ12 is a 32-bit Kinetis K1x Baseline Microcontroller based on ARM Cortex-M4 RISC architecture core operates at a maximum frequency of 120MHz. The device incorporates 1024kB internal flash, 128kB internal RAM, four 16-bit SAR A/D converter, two 12-bit D/A converter and 104 general-purpose I/O pins. This device also features communication interfaces like six UART modules, three SPI modules, two I2C modules and two I2S modules.
  • ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz
  • Serial programming interface (EzPort)
  • FlexBus external bus interface
  • NAND Flash controller interface
  • 3 to 32MHz Crystal oscillator and 32kHz Crystal oscillator
  • Multi-purpose clock generator
  • Multiple low-power modes to provide power optimization based on application requirements
  • Memory protection unit with multi-master protection
  • 32-channel DMA controller, supporting up to 128 request sources
  • External watchdog monitor
  • Software watchdog
  • Low-leakage wakeup unit
  • Hardware CRC module to support fast cyclic redundancy checks
  • 128-bit Unique identification (ID) number per chip
  • Low-power hardware touch sensor interface (TSI)
  • Programmable gain amplifier (PGA) integrated into each ADC
  • Four analog comparators (CMP) containing a 6-bit DAC and programmable reference input
  • Voltage reference
  • Programmable delay block
  • Two 8-channel Motor control/general purpose/PWM timers

Applications

Industrial

Associated Products

Compare Selected