Low

NXP  MC9S08LL64CLK  MICROCONTROLLER MCU, 8 BIT, S08, 40MHZ, LQFP-80

Technical Data Sheet (748.28KB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

NXP MC9S08LL64CLK
Video

Product Overview

The MC9S08LL64CLK is a 8-bit Application-specific Microcontroller based on enhanced HCS08 CPU (20MHz bus) with CISC architecture operates at a maximum frequency of 40MHz. The device incorporates 64kB internal flash, 4kB internal RAM, 10-channel 12-bit A/D converter and 64 general-purpose I/O pins. This device also features peripherals like one inter-integrated circuit (IIC) bus module to operate at up to 100kbps, one serial peripheral interface modules (SPI), two serial communications interface (SCI) and an analog comparator. Breakpoint capability to allow single breakpoint setting during in-circuit debugging and plus two more breakpoints in on-chip debug module.
  • HCS08 Instruction set with added BGND instruction
  • Support for up to 32 Interrupt/reset sources
  • Security circuitry to prevent unauthorized access to RAM and flash contents
  • Two low-power stop modes
  • Reduced-power wait mode
  • Peripheral clock gating register can disable clocks to unused modules, thereby reducing currents
  • Very low-power external oscillator
  • 6μs Typical wakeup time from stop3 mode
  • Loop-control pierce oscillator
  • Internal clock source (ICS)
  • Watchdog computer operating properly (COP) reset
  • Low-voltage warning with interrupt
  • Low-voltage detection with reset
  • Illegal opcode detection with reset
  • Illegal address detection with reset
  • Flash block protection
  • Single-wire background debug interface
  • On-chip in-circuit emulator (ICE) debug module
  • TOD (Time-of-day) 8-bit, quarter second counter
  • VREFx - Trimmable via an 8-bit register in 0.5mV steps

 

Product Information

MCU Applications:
Battery Management
Architecture:
S08
MCU Core Size:
8bit
Program Memory Size:
64KB
RAM Memory Size:
4KB
CPU Speed:
40MHz
No. of I/O's:
39I/O's
MCU Case Style:
LQFP
No. of Pins:
80Pins
Embedded Interface Type:
SCI, SPI
Supply Voltage Min:
1.8V
Supply Voltage Max:
3.6V
Packaging:
Each
Product Range:
HCS08 Series
No. of PWM Channels:
2
No. of Timers:
2
MPU Core Size:
8bit
MSL:
MSL 3 - 168 hours
Peripherals:
ADC, ACMP, LCD, TPM
Operating Temperature Min:
-40 °C
Operating Temperature Max:
85 °C
Supply Voltage Range:
1.8V to 3.6V
Oscillator Type:
External, Internal
SVHC:
No SVHC (17-Dec-2015)
Controller Family/Series:
HCS08

Find similar products  grouped by common attribute

Applications

  • Industrial;
  • Power Management

Legislation and Environmental

Moisture Sensitivity Level:
MSL 3 - 168 hours
Product Traceability
RoHS Compliant:
Yes

Associated Products