Low

NXP  KIT912J637EVME  Xtrinsic Battery Sensor EVALUATION Board

NXP KIT912J637EVME

Image is for illustrative purposes only. Please refer to product description.

Product Overview

The KIT912J637EVME is a system solution that gives the user the capability to easily evaluate most of the features provided by the MM912J637 Xtrinsic battery sensor. The 912J637 features two die in a single package. The 16bit core and the analog die are connected via the die to die interface that provides direct address access to the registers on the analog die. The analog die contains three 16bit sigma delta converters and enables simultaneous sampling of battery voltage and current, timer module, SCI module, LIN physical interface, and other general registers. All external signals are accessible via header connectors, and most of the signals can also be checked via test points. The evaluation module board also includes the TBDML programming/debugging interface, so no external interface is needed. The board is powered from two 4mm banana connectors.
  • Battery voltage measurement
  • Battery current measurement in up to eight ranges
  • On chip temperature measurement
  • Normal and two low power modes
  • Triggered wake up from LIN and periodic wake up
  • Signal low pass filtering (current, voltage)
  • PGA (programmable low noise gain amplifier) with automatic gain control feature
  • Accurate internal oscillator (an external quartz oscillator may be used for extended accuracy)
  • Communication via a LIN 2.1, LIN 2.0 bus interface
  • S12 microcontroller with 128k byte flash, 6kbyte RAM, 4kbyte data flash

Applications

Automotive

Contents

MM912J637 Evaluation Board, Cable, 6 FT. USB 2.0 A-M to B-M, Warranty Card, CD912J637(Contains CodeWarrior Code Template and CodeWarrior software).

Customers Also bought

Product Information

Silicon Manufacturer:
NXP
Silicon Core Number:
MM912J637
Kit Application Type:
Power Management
Application Sub Type:
Battery Monitor
Kit Contents:
Evaluation Kit MM912J637, 6ft Cable, USB 2.0 A-M to B-M
Product Range:
-
Features:
On Chip Temperature Measurement, Background Debug Module
SVHC:
No SVHC (17-Dec-2015)

Find similar products  grouped by common attribute

Legislation and Environmental

Product Traceability
RoHS Compliant:
Yes

Applications

  • Automotive

Contents

MM912J637 Evaluation Board, Cable, 6 FT. USB 2.0 A-M to B-M, Warranty Card, CD912J637(Contains CodeWarrior Code Template and CodeWarrior software).

Associated Products

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.

Recently Viewed

Product Recommendations