Low

FRDM-KL25Z - 

Freedom Development Board, ARM, Kinetis, KL25Z, CorteX-M0+, LQFP MCU

FRDM-KL25Z - Freedom Development Board, ARM, Kinetis, KL25Z, CorteX-M0+, LQFP MCU
Video
Video

The actual product may differ from image shown

Manufacturer:
NXP NXP
Manufacturer Part No:
FRDM-KL25Z
Newark Part No.:
28W5033
Technical Datasheet:
(EN)
See all Technical Docs

Product Overview

The FRDM-KL25Z is an ultra low cost development platform enabled by Kinetis L Series KL1x and KL2x MCUs families built on ARM Cortex-M0+ processor. It features a KL25Z128VLK, a KL2 family device boasting a max operating frequency of 48MHz, 128KB of flash, a full speed USB controller, and loads of analogue and digital peripherals. The FRDM-KL25Z hardware is form factor compatible with the Arduino R3 pin layout, providing a broad range of expansion board options. The on board interfaces include an RGB LED, a 3-axis digital accelerometer, and a capacitive touch slider. The development platform is supported by a range of Freescale and third party development software. The FRDM-KL25Z is the first hardware platform to feature the Freescale open standard embedded serial and debug adapter known as OpenSDA. This circuit offers several options for serial communications, flash programming and run control debugging.
  • MMA8451Q accelerometer, tri colour LED
  • Easy access to MCU I/O
  • Sophisticated OpenSDA debug interface
  • Mass storage device flash programming interface (default)
  • P&E Multilink interface provides run-control debugging and compatibility with IDE tools
  • Programmable OpenSDA debug interface with multiple applications
  • Battery ready, power measurement access points
  • Flexible power supply options USB, coin cell battery, external source

Applications

Consumer Electronics, Industrial, Medical

Product Information

:
NXP
:
32bit
:
Kinetis - KL2
:
ARM
:
Cortex-M0+
:
MKL2
:
Board only
:
-
Find similar products Choose and modify the attributes above to find similar products.

Substitutes

Associated Products

Compare Selected

Related Searches

US continental orders over $49 and under 50 pounds may qualify for free ground shipping. Click the link for the full Terms and Conditions of the offer.

298 In stock

for same day shipping

see cut-off times
 
Check stock and lead times

103 Further stock expected to ship on Oct 30, 2017

103 Further stock expected to ship on Nov 5, 2017

More stock available week commencing 12/18/17
$15.00 $ 15.00
Price for:
Each
Multiple: 1 Minimum: 1
Quantity Price
1 + $15.00
No longer stocked:: No Longer Manufactured::
Add to Cart
Total Price:
Total Price: ( )
Total Price: --

Customer Reviews

FREESCALE SEMICONDUCTOR - FRDM-KL25Z - CORTEX M0+, KINETIS, KL25Z, FREEDOM DEV BOARD 4 5 1 1
io board great microcontroller and io board. good for hobbies February 18, 2015
  • 2015-06-11T15:21:26.548-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_1, tr_1
  • loc_en_US, sid_28W5033, prod, sort_default
1-1 of 1

Customer Q&A Exchange

(There are 6 questions : 5 answers on this product)

Product Q&A

Ask your questions. Share your answers.

 
 
Browse Q&A
 
 
Search Questions
Need Product Support?
If you need immediate technical support use Live Support or Contact Us.
This space is yours...
Use this space to Ask your peers product questions or Answer those questions posted by them.
Sort by
Details: 
Would like to know, whether the Freedom board is provided with the components assembled (part number FRDM-KL25Z)?
2 years, 8 months ago
by
NewarkTechSupp
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)

Answers

A: 
Yes, it is an assembled board but the main items that have not been populated are the I/O headers and connectors.
2 years, 8 months ago
by
NewarkTechSupport
+5points
5out of 5found this answer helpful.
Was this helpful?(5)(0)
Details: 
I would like to know what other hardware devices and software I need in order to connect this development board (NW Part #28W5033) to a PC via USB port for programming and evaluation..I am new to ARM development and would like to learn more...Thanks.
2 years, 8 months ago
by
Anonymous
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)

Answers

A: 
IAR EWARM v6.4, FREESCALE CodeWarrior v10.3, KEIL MDK v4.54, ATOLLIC TrueStudio v3.1 are few of the Kinetis Compatible IDE's. All are downloadable & available as 30 day evaluation versions. The IAR EWARM is widely used can be dowloaded through the below link:
http://www.iar.com/en/Products/IAR-Embedded-Workbench/ARM/

Please refer our below community link for more info - starter guides, projects, examples etc.
http://www.element14.com/community/community/knode/dev_platforms_kits/element14_dev_kits/kinetis_kl2_freedom_board

For advanced programming, ARM Ecosystem hardware Development Tools are available such as:
USB powered BDM emulator - USBMLPPCBDM (Newark PN# 01M6487), ULINK2 (Newark PN# 74T5673), CODE-RED Red Probe+ etc.
2 years, 7 months ago
by
TechGTC
0points
0out of 0found this answer helpful.
Was this helpful?(0)(0)
Details: 
Can I use an Arduino shield board with this card (part number FRDM-KL25Z)?
5 months, 1 week ago
by
NewarkTechSupp
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)

Answers

A: 
Yes, the I/O headers on the FRDM-KL25Z are arranged to allow compatibility with peripheral boards (known as shields) that connect to ArduinoT and Arduino-compatible microcontroller boards, but you will need to solder header socket to the Freedom board to plug in the shield. ArduinoT software drivers for the shields do not apply to the ARMT core architecture of the Freedom board processor.
5 months, 1 week ago
by
NewarkTechSupport
0points
0out of 0found this answer helpful.
Was this helpful?(0)(0)
Details: 
Can I use both USB ports in my application(part number FRDM-KL25Z)?
5 months, 1 week ago
by
NewarkTechSupp
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)

Answers

A: 
No. The one port is used as an Open SDA Debugging port.
5 months, 1 week ago
by
NewarkTechSupport
0points
0out of 0found this answer helpful.
Was this helpful?(0)(0)
Details: 
Where can I find information on Open SDA(part number FRDM-KL25Z)?
5 months, 1 week ago
by
NewarkTechSupp
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)

Answers

A: 
OpenSDA Support if available from PE Micro, http://www.pemicro.com/opensda/ and also through Freescale http://www.freescale.com/webapp/sps... and the element 14 community http://www.element14.com/community/...
5 months, 1 week ago
by
NewarkTechSupport
0points
0out of 0found this answer helpful.
Was this helpful?(0)(0)
Details: 
I'm wondering if Visual Studio 2010's capability to cross compile ARM binaries can be used to write and compile code for this device.
2 years, 6 months ago
by
SailingNut
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)
1 of 1
  • 2015-06-11T15:22:08.212-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_28W5033, prod, sort_default
1 of 1

Community

Like to see information about this product from other customers?

 Read discussions, blogs, documents from our community members.

Filters:

Select document type(s) you want to see and click “Apply Filters” button
Post a question to one of our experts or start a discussion and get responses from supplier experts and fellow engineers in our community.