NXP  FRDM-KL25Z  Freedom Development Board, ARM, Kinetis, KL25Z, CorteX-M0+, MKL25Z128VLK4 80 LQFP MCU

NXP FRDM-KL25Z

Image is for illustrative purposes only. Please refer to product description.

  • Manufacturer:
  • Newark Part No.: 28W5033
  • Manufacturer Part No FRDM-KL25Z

Product Overview


The FRDM-KL25Z is an ultra low cost development platform enabled by Kinetis L Series KL1x and KL2x MCUs families built on ARM Cortex-M0+ processor. It features a KL25Z128VLK, a KL2 family device boasting a max operating frequency of 48MHz, 128KB of flash, a full speed USB controller, and loads of analogue and digital peripherals. The FRDM-KL25Z hardware is form factor compatible with the Arduino R3 pin layout, providing a broad range of expansion board options. The on board interfaces include an RGB LED, a 3-axis digital accelerometer, and a capacitive touch slider. The development platform is supported by a range of Freescale and third party development software. The FRDM-KL25Z is the first hardware platform to feature the Freescale open standard embedded serial and debug adapter known as OpenSDA. This circuit offers several options for serial communications, flash programming and run control debugging.
  • MMA8451Q accelerometer, tri colour LED
  • Easy access to MCU I/O
  • Sophisticated OpenSDA debug interface
  • Mass storage device flash programming interface (default)
  • P&E Multilink interface provides run-control debugging and compatibility with IDE tools
  • Programmable OpenSDA debug interface with multiple applications
  • Battery ready, power measurement access points
  • Flexible power supply options USB, coin cell battery, external source

Applications

Consumer Electronics; Industrial; Medical
Back to top

Product Information


  • Silicon Manufacturer NXP
  • Core Architecture ARM
  • Core Sub-Architecture Cortex-M0+
  • Silicon Core Number MKL2
  • Silicon Family Name Kinetis - KL2
  • No. of Bits 32bit
  • Kit Contents Board only
  • Features MKL25Z128VLK4 80 LQFP MCU, Arduino Style Headers, Cap Touch Slider, Accelerometer, Open SDA
  • Product Range -
  • SVHC To Be Advised
  •   element14 Technical Page (393.09KB) EN
  • Operating Instructions (1.56MB) EN
  • Packaging / Drawing / Footprint (502.40KB) EN
  • Availability

    Availability:  62


    • 62 in stock for same day shipping
     
    Check stock and lead times
    • 357 Further stock expected to ship on May 15, 2016
    • More stock available week commencing 11/14/16

    Price for: Each

    Minimum order quantity: 1

    Order multiple quantity: 1

    Price: $14.71 $14.71

    Buy

    Price

    Quantity List Price
    1+ $14.71
     
     
    Low

    Legislation and Environmental


    Back to top

    Similar Products

    Back to top

    Customer Reviews


    FREESCALE SEMICONDUCTOR - FRDM-KL25Z - CORTEX M0+, KINETIS, KL25Z, FREEDOM DEV BOARD 4 5 1 1
    io board great microcontroller and io board. good for hobbies February 18, 2015
    • 2015-06-11T15:21:26.548-05:00
    • bvseo_lps, prod_bvrr, vn_prr_5.6
    • cp-1, bvpage1
    • co_hasreviews, tv_1, tr_1
    • loc_en_US, sid_28W5033, prod, sort_default
    1-1 of 1
    Back to top

    Customer Q&A Exchange

    (There are 6 questions : 5 answers on this product)

    Product Q&A

    Ask your questions. Share your answers.

     
     
    Browse Q&A
     
     
    Search Questions
    Need Product Support?
    If you need immediate technical support use Live Support or Contact Us.
    This space is yours...
    Use this space to Ask your peers product questions or Answer those questions posted by them.
    Sort by
    Details: 
    Would like to know, whether the Freedom board is provided with the components assembled (part number FRDM-KL25Z)?
    2 years, 8 months ago
    by
    NewarkTechSupp
    0points
    0out of 0found this question helpful.
    Was this helpful?(0)(0)

    Answers

    A: 
    Yes, it is an assembled board but the main items that have not been populated are the I/O headers and connectors.
    2 years, 8 months ago
    by
    NewarkTechSupport
    +5points
    5out of 5found this answer helpful.
    Was this helpful?(5)(0)
    Details: 
    I would like to know what other hardware devices and software I need in order to connect this development board (NW Part #28W5033) to a PC via USB port for programming and evaluation..I am new to ARM development and would like to learn more...Thanks.
    2 years, 8 months ago
    by
    Anonymous
    0points
    0out of 0found this question helpful.
    Was this helpful?(0)(0)

    Answers

    A: 
    IAR EWARM v6.4, FREESCALE CodeWarrior v10.3, KEIL MDK v4.54, ATOLLIC TrueStudio v3.1 are few of the Kinetis Compatible IDE's. All are downloadable & available as 30 day evaluation versions. The IAR EWARM is widely used can be dowloaded through the below link:
    http://www.iar.com/en/Products/IAR-Embedded-Workbench/ARM/

    Please refer our below community link for more info - starter guides, projects, examples etc.
    http://www.element14.com/community/community/knode/dev_platforms_kits/element14_dev_kits/kinetis_kl2_freedom_board

    For advanced programming, ARM Ecosystem hardware Development Tools are available such as:
    USB powered BDM emulator - USBMLPPCBDM (Newark PN# 01M6487), ULINK2 (Newark PN# 74T5673), CODE-RED Red Probe+ etc.
    2 years, 7 months ago
    by
    TechGTC
    0points
    0out of 0found this answer helpful.
    Was this helpful?(0)(0)
    Details: 
    Can I use an Arduino shield board with this card (part number FRDM-KL25Z)?
    5 months, 1 week ago
    by
    NewarkTechSupp
    0points
    0out of 0found this question helpful.
    Was this helpful?(0)(0)

    Answers

    A: 
    Yes, the I/O headers on the FRDM-KL25Z are arranged to allow compatibility with peripheral boards (known as shields) that connect to ArduinoT and Arduino-compatible microcontroller boards, but you will need to solder header socket to the Freedom board to plug in the shield. ArduinoT software drivers for the shields do not apply to the ARMT core architecture of the Freedom board processor.
    5 months, 1 week ago
    by
    NewarkTechSupport
    0points
    0out of 0found this answer helpful.
    Was this helpful?(0)(0)
    Details: 
    Can I use both USB ports in my application(part number FRDM-KL25Z)?
    5 months, 1 week ago
    by
    NewarkTechSupp
    0points
    0out of 0found this question helpful.
    Was this helpful?(0)(0)

    Answers

    A: 
    No. The one port is used as an Open SDA Debugging port.
    5 months, 1 week ago
    by
    NewarkTechSupport
    0points
    0out of 0found this answer helpful.
    Was this helpful?(0)(0)
    Details: 
    Where can I find information on Open SDA(part number FRDM-KL25Z)?
    5 months, 1 week ago
    by
    NewarkTechSupp
    0points
    0out of 0found this question helpful.
    Was this helpful?(0)(0)

    Answers

    A: 
    OpenSDA Support if available from PE Micro, http://www.pemicro.com/opensda/ and also through Freescale http://www.freescale.com/webapp/sps... and the element 14 community http://www.element14.com/community/...
    5 months, 1 week ago
    by
    NewarkTechSupport
    0points
    0out of 0found this answer helpful.
    Was this helpful?(0)(0)
    Details: 
    I'm wondering if Visual Studio 2010's capability to cross compile ARM binaries can be used to write and compile code for this device.
    2 years, 6 months ago
    by
    SailingNut
    0points
    0out of 0found this question helpful.
    Was this helpful?(0)(0)
    1 of 1
    • 2015-06-11T15:22:08.212-05:00
    • bvseo_lps, prod_bvqa, vn_prr_5.6
    • cp-1, bvpage1
    • co_hasquestionsanswers
    • loc_en_US, sid_28W5033, prod, sort_default
    1 of 1

    Community

    Like to see information about this product from other customers?

     Read discussions, blogs, documents from our community members.

    Filters:

    Post a question to one of our experts or start a discussion and get responses from supplier experts and fellow engineers in our community.

    Substitutes


      Newark Part No. Manufacturer Part No Manufacturer / Description
    Avail Price Qty
    ascdsc ascdsc ascdsc ascdsc ascdsc
    Upgrade
    53W2646
    FRDM-KL05Z

    FRDM-KL05Z

    NXP

    Freedom Development Board, ARM, Kinetis, KL05Z, CorteX-M0+, 32KB Flash, 32QFN, 12bit ADC

    Availability:​ 2,195  

    Price for: Each

    1+ $16.18 5+ $14.61 10+ $13.03

    Buy

    see cut-off times

    More stock available week commencing 8/15/16
    46W9880
    FRDM-KL25Z BASIC KIT

    FRDM-KL25Z BASIC KIT

    NXP

    Development Kit, Kinetis KL25Z Freedom Platform, Arduino style headers, Accelerometer, Open SDA

    Availability:​ 0

    Price for: Each

    1+ $13.95

    Buy
      More stock available week commencing 5/16/16

    Not Normally Stocked

    Non-Cancelable / Non Returnable

    46W9881
    FRDM-KL25Z PROTO SHIELD KIT

    FRDM-KL25Z PROTO SHIELD KIT

    NXP

    Development Kit, MKL25Z128VLK4 80 LQFP MCU, Arduino style headers, Accelerometer, Open SDA

    Availability:​ 0

    Price for: Each

    1+ $23.95

    Buy
      More stock available week commencing 5/16/16

    Not Normally Stocked

    Non-Cancelable / Non Returnable

    Associated Products


    Customers Also Bought