Low

DSP56F805FV80E - 

Digital Signal Controller, 56800E Series, 80 MHz, 76 KB, 32 I/O's, CAN, SCI, SPI, 3.3 V

NXP DSP56F805FV80E

The actual product may differ from image shown

Manufacturer:
NXP NXP
Manufacturer Part No:
DSP56F805FV80E
Newark Part No.:
62K4074
Product Range
56800E Series
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
76KB
:
32I/O's
:
-40°C
:
-
:
Each
:
85°C
:
3.3V
:
144Pins
:
80MHz
:
CAN, SCI, SPI
:
3V
:
56800E Series
:
LQFP
:
3.6V
:
MSL 3 - 168 hours
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The DSP56F805FV80E is a 16-bit Digital Signal Controller combines the processing power of a DSP and the functionality of a microcontroller with a flexible set of peripherals on a single chip. The 56800 core is based on a Harvard-style architecture consisting of three execution units which operate in parallel, allowing as many as six operations per instruction cycle. The microprocessor-style programming model and optimized instruction set allow straightforward generation of efficient, compact code for both DSP-and MCU-style applications. The instruction set is also highly efficient for C compilers, enabling rapid development of optimized control applications. The 56F805 supports program execution from either internal or external memories. Two data operands can be accessed from the on-chip data RAM per instruction cycle. The 56F805 also provides two external dedicated interrupt lines and up to 32 general purpose input/output (GPIO) lines, depending on peripheral configuration.
  • Single-cycle 16 x 16-bit parallel multiplier-accumulator (MAC)
  • Two 36-bit accumulators, including extension bits
  • 16-bit bidirectional barrel shifter
  • Parallel instruction set with unique processor addressing modes
  • Hardware DO and REP loops
  • Three internal address buses and one external address bus
  • Four internal data buses and one external data bus
  • Instruction set supports both DSP and controller functions
  • Controller style addressing modes and instructions for compact code
  • Efficient C compiler and local variable support
  • Software subroutine and interrupt stack with depth limited only by memory
  • JTAG/OnCE debug programming interface
  • Fabricated in high-density CMOS with 5V-tolerant, TTL-compatible digital inputs

Applications

Motor Drive & Control, Automation & Process Control, Metering, Lighting, Power Management, Industrial

Associated Products

Compare Selected