Low

TL175 - 

Test Lead Set, Test Tip Probe to 4mm Right Angle Banana Plug, 1 kV, 10 A, 2 Leads

The actual product may differ from image shown

Manufacturer:
FLUKE FLUKE
Manufacturer Part No:
TL175
Newark Part No.:
73R7393
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
Test Tip Probe
:
4mm Right Angle Banana Plug, Shrouded
:
1kV
:
10A
:
Black, Red
:
-
:
-
:
2
:
-
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The Fluke TL175 TwistGuard™ Test Leads offer adjustable length test tips for use in different measurement environments. The TwistGuard™ adjustable tips enhance safety and versatility length. The WearGuard™ indicator shows damage to leads and provides heavy duty strain relief to withstand over 30,000 bends.
  • Patented TwistGuard™ extendable tip
  • New WearGuard™ lead wire wear indication 
  • Double insulated silicone leads
  • Extra-heavy duty strain relief on both probe-end and plug-end
  • Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max, Pollution Degree 2
  • Conforms to EN61010-031
  • One-year warranty
  • -20°C to 55°C Operating Temperature and 2000m Altitude

Applications

Test & Measurement, Oil & Gas, Research & Development, Electronics Design, Electronics Service, Maintenance & Repair, Electrical, Industrial

Contents

One pair (red and black) comfort grip probes with Patented TwistGuard™ extendable tip.

Substitutes

Related Searches

US continental orders over $49 and under 50 pounds may qualify for free ground shipping. Click the link for the full Terms and Conditions of the offer.

353 In stock

for same day shipping

see cut-off times
 
Check stock and lead times
More stock available week commencing 1/1/18
$27.90 $ 27.90
Price for:
Each
Multiple: 1 Minimum: 1
Quantity Price Your Price
1 + $30.99
No longer stocked:: No Longer Manufactured::
Add to Cart
Total Price:
Total Price: ( )
Total Price: --

Customer Reviews

FLUKE - TL175 - TEST LEAD SET, BLACK, RED, 1KV, 10A 4.4 5 9 9
Concerned about which TL175 I purchased. In a Fluke youtube video “Fluke Test Leads, Probes and Accessories” published on Aug 25, 2013 the TL175s are shown with the gray Fluke label on the probe. In an independent youtube video review of the TL175 there is a comment claiming Fluke supposedly stated that only the TL175s with the "yellow" Fluke label are licensed for the US. Yet the Fluke video as well as a set I recently purchased in the US have the gray Fluke branding not the yellow branding on the probes. I was suspicious since this is the second TL175 set that I purchased and the first set (yellow) was in Fluke packaging while the second set (gray) came in clear bag. There is clearly a quality difference in the twist mechanism between the two sets which has me concerned about differences that I cannot see related to safety. There is no country of origin on the gray set (or the yellow set) and they look exactly as they appear in the Aug 25 Fluke youtube video. Can I assume Fluke stands behind the set without the yellow Fluke branding specifically related to the safety ratings? Assuming the two sets are equal in safety and based solely on the twist mechanism, I would have rated the yellow branded probes 5 stars and the gray branded probes 3 stars. October 11, 2014
I am interested in this product Do these leads fit the t5-600 banana plug? I would like to purchase this product if it fits my meter. October 18, 2013
Very good quality! I just got these test leads two days ago. I can say that they are very well made, No surprise, they are Fluke quality. I noticed that when I twist the probe and the tip "cover" goes up, the click is VERY soft...I would say too soft. I would like it better the same way as when it is going down that is a little harder and the click is louder. I know it is a stupid thing to complaint but, it is just me. other thing will be the hard plastic material used in the shrouded banana, I would prefer to see it "flexible". I know for fact that the TL75 uses the same kind of hard plastic and one time I pressed it a little bit and it cracked!!! Right now I have pomona 5519A test leads too that I like very much and they use a very nice soft shrouded banana plugs that are very flexible and I can literally "squeeze" them and they will not crack at all. Beside those two things, I can say these leads are very good and they are a must to have. Fluke should include these TL175 test leads with all 170, 80 Multimeter series and top models (all made in the USA). I have used many test leads and so far I can strongly recommend these Fluke TL175 and the Pomona 5519A. I find it very good to post reviews here at Fluke main page, because We can let Fluke know what We want and what We need. To me Fluke is doing an excellent job building those multimeters that are well known for their Quality, accuracy and reliability. I only use the best....I only use Fluke!. August 23, 2013
Very good quality! I just got these test leads two days ago. I can say that they are very well made, No surprise, they are Fluke quality. I noticed that when I twist the probe and the tip "cover" goes up, the click is VERY soft...I would say too soft. I would like it better the same way as when it is going down that is a little harder and the click is louder. I know it is a stupid thing to complaint but, it is just me. other thing will be the hard plastic material used in the shrouded banana, I would prefer to see it "flexible". I know for fact that the TL75 uses the same kind of hard plastic and one time I pressed it a little bit and it cracked!!! Right now I have pomona 5519A test leads too that I like very much and they use a very nice soft shrouded banana plugs that are very flexible and I can literally "squeeze" them and they will not crack at all. Beside those two things, I can say these leads are very good and they are a must to have. Fluke should include these TL175 test leads with all 170, 80 Multimeter series and top models (all made in the USA). I have used many test leads and so far I can strongly recommend these Fluke TL175 and the Pomona 5519A. I find it very good to post reviews here at Fluke main page, because We can let Fluke know what We want and what We need. To me Fluke is doing an excellent job building those multimeters that are well known for their Quality, accuracy and reliability. I only use the best....I only use Fluke!. August 23, 2013
Accessories I like the test leads but my alligator clips (AC285) doesn't work on them. The video for these leads show a nice set of alligator clips that screw on them but I can't find them on this site. March 11, 2013
  • 2015-06-11T15:21:31.968-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_9, tr_9
  • loc_en_US, sid_73R7393, prod, sort_default
2 Next>>

Customer Q&A Exchange

(There is 1 question : 1 answer on this product)

Product Q&A

Ask your questions. Share your answers.

 
 
Browse Q&A
 
 
Search Questions
Need Product Support?
If you need immediate technical support use Live Support or Contact Us.
This space is yours...
Use this space to Ask your peers product questions or Answer those questions posted by them.
4 years ago
by
jwvoltz
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)

Answers

A: 
yes the Test Leads are suitable for Fluke 337 meter
4 years ago
by
TechGTC
0points
0out of 0found this answer helpful.
Was this helpful?(0)(0)
1 of 1
  • 2015-06-11T15:20:22.496-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_73R7393, prod, sort_default
1 of 1

Community

Like to see information about this product from other customers?

 Read discussions, blogs, documents from our community members.

Filters:

Select document type(s) you want to see and click “Apply Filters” button
Post a question to one of our experts or start a discussion and get responses from supplier experts and fellow engineers in our community.