FLUKE  FLUKE-789  PROCESS METER, MULTIMETER/LOOP CALIBRATOR

FLUKE FLUKE-789

Image is for illustrative purposes only. Please refer to product description.

  • Manufacturer:
  • Newark Part No.: 81C7984
  • Manufacturer Part No FLUKE-789

Product Overview


Combines two tools frequently used by process technicians. It combines a true RMS digital multimeter and a loop calibrator in a single handheld tool, reducing the need to carry multiple instruments around.
  • 24V loop power supply
  • Very large dual display
  • Enhanced dacklight with 2 brightness settings
  • 1200Ω drive capacity on mA source
  • HART mode setting with loop power and a built-in 250Ω resistor
  • 0% & 100% buttons to toggle between 4 & 20mA sourcing for quick span check
  • Precision 1000V, 440mA true RMS digital multimeter
  • 0.1% dc voltage accuracy
  • 0.05% dc current accuracy
  • Frequency measurement up to 20 kHz
  • Min/Max/Average/Hold/Relative modes
  • Diode test and continuity bleeper
  • Simultaneous mA & % of scale readout
  • 20mA dc current source/loop calibrator/simulator
  • Manual step (100%, 25%, coarse & fine) plus auto step and auto ramp

Applications

Signal Processing; System Monitoring; Test & Measurement

Contents

Contents: Meter, AC72 alligator clips, 4x AA 9V alkaline battery (installed), TL71 safety-designated test lead set, users manual & quick reference guide
Back to top

Product Information


  • DMM Functions AC/DC Current, AC/DC Voltage, Continuity, Diode, Frequency, Resistance
  • Current Measure AC Max
  • Current Measure DC Max
  • Voltage Measure AC Max
  • Voltage Measure DC Max
  • Resistance Measure Max
  • DMM Response Type Average
  • Display Count
  • No. of Digits
  • Range Selection
  • Product Range -
  • Kit Contents TL71 Premium Test Lead Set, AC72 Alligator Clips, 4 x AA Batteries
  • Operating Temperature Min -20 °C
  • Voltage Measuring Range DC 0V to 1000V
  • Voltage Measuring Range AC 0V to 1000V
  • Current Measuring Range DC 0A to 1A
  • External Depth 50 mm
  • Calibration Type Current, Frequency, Resistance, Voltage
  • Current Measuring Range AC 0A to 1A
  • External Width 100 mm
  • DMM Type Hand Held
  • Weight 600 g
  • Accuracy VDC:0.1%+1LSD, VAC:0.7%+2LSD, mAdc:0.05%+2LSD, ADC:0.2%+2LSD, AAC:1%+2LSD, Resistance:0.2%+1LSD
  • Operating Temperature Max 55 °C
  • Ranging Auto, Manual
  • External Height 203 mm
  • SVHC No SVHC (15-Jun-2015)

Find similar products  grouped by common attribute

View this product in our online catalog


This product also features on the following pages and catalog editions:

  •  131/2225
  •  132/2232

Availability

Availability:  24


  • 24 in stock for same day shipping
 
Check stock and lead times
    More stock available week commencing 5/23/16

Price for: Each

Minimum order quantity: 1

Order multiple quantity: 1

Price: $999.99 $999.99

Buy

Price

Quantity List Price
1+ $999.99
 
 
Low

Legislation and Environmental


Back to top

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.

Back to top

Customer Reviews


FLUKE - FLUKE-789 - PROCESS METER, MULTIMETER/LOOP CALIBRATOR 5 5 8 8
The Fluke 789 ProcessMeter is a great tool for Automation / Process Engineers I use mine all the time for checking mA loops and load cells. I find the loop power function particularly useful for setting up a new transmitter before leaving the workshop. This meter is the only one I need in my tool bag. As with all of the Fluke equipment I have come across, the build quality is great and it is a joy to use. Check out the Fluke Milliamp Process Clamp Meters if you need to check a loop without breaking into it. April 5, 2013
The Fluke 789 ProcessMeter is a great tool for Automation / Process Engineers I use mine all the time for checking mA loops and load cells. I find the loop power function particularly useful for setting up a new transmitter before leaving the workshop. This meter is the only one I need in my tool bag. As with all of the Fluke equipment I have come across, the build quality is great and it is a joy to use. Check out the Fluke Milliamp Process Clamp Meters if you need to check a loop without breaking into it. April 5, 2013
Best Quality in the Market Dear all, This is the best quality product money can buy. It is reliable. February 16, 2013
Best Quality in the Market Dear all, This is the best quality product money can buy. It is reliable. February 16, 2013
great asset This meter is the "Cats Meow!" This line of meters has always been rugged and tough, but now with this new guy and the HART addition.. How could the best get better... Well, they did it! I use this guy everyday even when I'm not loop checking or calibrating a device... all around great tool! The IR interface is a cool feature, I am waiting for the IT guy to install FLUKE View FORMS.. can't wait to try that out.. June 11, 2012
  • 2015-06-11T15:21:46.247-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_8, tr_8
  • loc_en_US, sid_81C7984, prod, sort_default
2 Next>>
Back to top

Customer Q&A Exchange

(There are 5 questions : 5 answers on this product)

Product Q&A

Ask your questions. Share your answers.

 
 
Browse Q&A
 
 
Search Questions
Need Product Support?
If you need immediate technical support use Live Support or Contact Us.
This space is yours...
Use this space to Ask your peers product questions or Answer those questions posted by them.
Sort by
4 years, 2 months ago
by
dsadsd
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)

Answers

A: 
It Includes TL71 Premium Test Lead Set Plus AC72 Alligator Clips, Four AA Alkaline Batteries(installed), Users Manual and Quick Reference Guide
4 years ago
by
Suresh
+1point
1out of 1found this answer helpful.
Was this helpful?(1)(0)
Details: 
Looking for a replacement battery for handheld loop calibrator (part number FLUKE-789).
3 years, 2 months ago
by
NewarkTechSupp
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)

Answers

A: 
According to datasheet this loop calibrator uses 4 AA sized alkaline batteries with 1.5V output voltage. So suggested part number of battery which can be used with this process calibrator is E91MP-8 from Energizer.
3 years, 2 months ago
by
NewarkTechSupport
0points
0out of 0found this answer helpful.
Was this helpful?(0)(0)
Details: 
Looking for a replacement fuse for handheld processmeter (part number FLUKE-789)?
2 years, 11 months ago
by
NewarkTechSupp
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)

Answers

A: 
Suggested part number of fuse which can be used as a replacement fuse with this calibrator is 943121 from Fluke.
2 years, 10 months ago
by
NewarkTechSupport
0points
0out of 0found this answer helpful.
Was this helpful?(0)(0)
Details: 
Can you suggest the part number of current clamp which can be used with processmeter (part number FLUKE-789) so that current measuing range can be extended to 600A?
2 years, 11 months ago
by
NewarkTechSupp
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)

Answers

A: 
Suggested part number of AC/DC current clamp which can be used with this processmeter is I1010 from Fluke. Using this clamp current measuring range of this processmeter can be extended upto 600A (AC) or 1000A (DC) which enables taking current readings without breaking the circuit being measured.
2 years, 10 months ago
by
NewarkTechSupport
0points
0out of 0found this answer helpful.
Was this helpful?(0)(0)
2 years, 7 months ago
by
NewarkProductEnrichment01
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)

Answers

A: 
Description:
The Fluke 787 ProcessMeter was the first tool to combine a loop calibrator with a DMM to give process technicians double the power in one tool. Now it’s even better – the ultimate loop calibration multimeter – the Fluke 789 ProcessMeter. The 789 has a display that’s not only twice as large, but also twice as bright with two levels of backlighting. And with its built-in, selectable 250 ohm HART® resistor, it eliminates the need to carry a separate resistor with you. Now process technicians can do a lot more while carrying a lot less.

Feature & Benefits:
100 % larger dual display
1200 ohm drive capability on mA source
Enhanced backlight with two brightness settings
0-100 % mA Span Check buttons to toggle between 4 and 20 mA
Infrared I/O serial port compatible with FlukeView® Forms Software Version 2.1
Externally accessible fuses for easy replacement

Applications: Industrial, Test & Measurement, Maintenance & Repair

Kit Contents:
Meter, TL71 test leads set, AC72 alligator clips, four AA batteries, user manual, quick reference guide.
2 years, 6 months ago
by
NewarkProductEnrichment1
0points
0out of 0found this answer helpful.
Was this helpful?(0)(0)
1 of 1
  • 2015-06-11T15:21:03.241-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_81C7984, prod, sort_default
1 of 1

Community

Like to see information about this product from other customers?

 Read discussions, blogs, documents from our community members.

Filters:

Post a question to one of our experts or start a discussion and get responses from supplier experts and fellow engineers in our community.

Substitutes


  Newark Part No. Manufacturer Part No Manufacturer / Description
Avail Price Qty
ascdsc ascdsc ascdsc ascdsc ascdsc
Upgrade
47X3303
FLUKE-789 FC/T3000

FLUKE-789 FC/T3000

FLUKE

PROCESSMETER / TEMP MEASURE, FC WIRELESS

Availability:​ 0

Price for: Each

1+ $1,299.99

Buy
    More stock available week commencing 5/23/16

Not Normally Stocked

Non-Cancelable / Non Returnable

Suggested Substitutes
68K0366
FLUKE-789 CAL D

FLUKE-789 CAL D

FLUKE

LOOP CALIBRATION DIGITAL MULTIMETER

Availability:​ 24  

Price for: Each

1+ $1,174.29

Buy
Supplier Direct Ship Continental US Only

Non-Cancelable / Non Returnable

Ships within 2-3 business days for in stock items

Associated Products


Customers Also Bought