Low

FLUKE  FLUKE-789  PROCESS METER, MULTIMETER/LOOP CALIBRATOR

Image is for illustrative purposes only. Please refer to product description.

FLUKE FLUKE-789
Video

Product Overview

Combines two tools frequently used by process technicians. It combines a true RMS digital multimeter and a loop calibrator in a single handheld tool, reducing the need to carry multiple instruments around.
  • 24V loop power supply
  • Very large dual display
  • Enhanced dacklight with 2 brightness settings
  • 1200Ω drive capacity on mA source
  • HART mode setting with loop power and a built-in 250Ω resistor
  • 0% & 100% buttons to toggle between 4 & 20mA sourcing for quick span check
  • Precision 1000V, 440mA true RMS digital multimeter
  • 0.1% dc voltage accuracy
  • 0.05% dc current accuracy
  • Frequency measurement up to 20 kHz
  • Min/Max/Average/Hold/Relative modes
  • Diode test and continuity bleeper
  • Simultaneous mA & % of scale readout
  • 20mA dc current source/loop calibrator/simulator
  • Manual step (100%, 25%, coarse & fine) plus auto step and auto ramp

Applications

Signal Processing; System Monitoring; Test & Measurement

Contents

Contents: Meter, AC72 alligator clips, 4x AA 9V alkaline battery (installed), TL71 safety-designated test lead set, users manual & quick reference guide

Customers Also bought

Product Information

DMM Functions:
AC/DC Current, AC/DC Voltage, Continuity, Diode, Frequency, Resistance
Current Measure AC Max:
-
Current Measure DC Max:
-
Voltage Measure AC Max:
-
Voltage Measure DC Max:
-
Resistance Measure Max:
-
DMM Response Type:
Average
Display Count:
-
No. of Digits:
-
Range Selection:
-
Product Range:
-
Kit Contents:
TL71 Premium Test Lead Set, AC72 Alligator Clips, 4 x AA Batteries
Operating Temperature Min:
-20 °C
Voltage Measuring Range DC:
0V to 1000V
Voltage Measuring Range AC:
0V to 1000V
Current Measuring Range DC:
0A to 1A
External Depth:
50 mm
Calibration Type:
Current, Frequency, Resistance, Voltage
Current Measuring Range AC:
0A to 1A
External Width:
100 mm
DMM Type:
Hand Held
Weight:
600 g
Accuracy:
VDC:0.1%+1LSD, VAC:0.7%+2LSD, mAdc:0.05%+2LSD, ADC:0.2%+2LSD, AAC:1%+2LSD, Resistance:0.2%+1LSD
Operating Temperature Max:
55 °C
Ranging:
Auto, Manual
External Height:
203 mm
SVHC:
No SVHC (15-Jun-2015)

Find similar products  grouped by common attribute

Legislation and Environmental

Applications

  • Signal Processing;
  • System Monitoring;
  • Test & Measurement

Contents

Contents: Meter, AC72 alligator clips, 4x AA 9V alkaline battery (installed), TL71 safety-designated test lead set, users manual & quick reference guide

Substitutes

Associated Products

Recently Viewed

Product Recommendations