FLUKE  FLUKE-381  REMOTE DISPLAY 1000A TRMS CLAMP W/IFLEX

FLUKE FLUKE-381

Image is for illustrative purposes only. Please refer to product description.

Additional images

  • Manufacturer:
  • Newark Part No.: 73R7392
  • Manufacturer Part No FLUKE-381

Product Overview


This clamp meter does everything you would expect from a clamp meter, and then lets you remove the display for even more flexibility. Now one technician can do jobs that used to require two people; clamp the Fluke 381 around a conductor, remove the display and walk across the room to operate controls or remove protective equipment, all while watching real-time readings. The new iFlex flexible current probe (included) expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.
  • 1000 A AC and DC current measurement with fixed Jaw
  • 1000 V AC and DC voltage measurement
  • True-rms ac voltage and current for accurate measurements on non-linear signals
  • Frequency measurement to 500 Hz with both Jaw and iFlex
  • 60 kohm resistance measurement to with continuity detection
  • Min, max, average and inrush recording to capture variations automatically
  • Wireless technology allows the display to be carried up to 30 ft. away from the point of measurement
  • Processing allows for use in noisy electrical environments while providing stable readings
  • Proprietary inrush measurement technology to filter out noise and capture motor starting current
  • Radio transmitter automatically turns off when the display is connected to the meter

Applications

Industrial; Maintenance & Repair; Test & Measurement

Contents

18-inch iFlex™ flexible current probe, Coated instruction card, Safety information sheet, Soft carrying case, TL75 test leads, Five AA Alkaline batteries
Back to top

Product Specifications, Documents & More


  • Current Measure AC Max: 2.5kA
  • Current Measuring Range AC: 999.9A, 2500A
  • Current Measuring Range DC: 999.9A
  • DMM Functions: AC/DC Current, AC/DC Voltage, Continuity, Frequency, Resistance
  • DMM Response Type: True RMS
  • DMM Type: Clamp
  • Jaw Opening Max: 34mm
  • No. of Digits: -
  • Plug Type: -
  • Range Selection: Auto
  • Ranging: Auto
  • Resistance Measure Max: 60kohm
  • SVHC: No SVHC (15-Jun-2015)
  • Temperature Measuring Range: -
  • Voltage Measure AC Max: 1kV
  • Voltage Measure DC Max: 1kV
  • Voltage Measuring Range AC: 1000V
  • Voltage Measuring Range DC: 1000V

Find similar products  grouped by common attribute

View this product in our online catalog


This product also features on the following pages and catalog editions:

  •  131/2223
  •  132/2225

Availability

Availability:  26


  • 26 in stock for same day shipping
 
Check stock and lead times
    More stock available week commencing 3/7/16

Price for: Each 1

Minimum order quantity: 1

Order multiple quantity: 1

Price: $549.99 $549.99

Buy

Price

Quantity List Price
1+ $549.99
 
 
Low

Legislation and Environmental


Back to top

Similar Products


Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.

Back to top
Back to top

Customer Reviews


FLUKE - FLUKE-381 - REMOTE DISPLAY 1000A TRMS CLAMP W/IFLEX 4.4 5 5 5
Great meter with one fatal flaw I've had my 381 for coming up on 2 years, and while it's a great meter with unique features, they really botched the engineering in one area; Battery Life.  The two AAA batteries in the display unit seem to go dead within a few weeks regardless of use.  This seems to always happen at inopportune times when you really need the meter and are out of spare batteries. The "work around" is to pull the batteries when not in use.  They'll last a year if you do this, but it's a pain, and I've already lost the battery cover when it blew away in the wind.  Why Fluke couldn't provide a simple mechanical power switch even if they couldn't do better on power management is beyond comprehension.  I've owned a lot of Fluke products over the years, and I must say their attention to detail is lapsing in their newer products.  I will likely consider a competitor's product next time. November 30, 2013
This product is a very important to you saftey. This meter with the removal display face makes my job more safe. I use this meter alot to take amp reading in switch gear. I can set the meter up have the display in my hand and close the motor bucket and return power. Whlie getting my reading outside the gear with it closed. October 25, 2012
This product is a very important to you saftey. This meter with the removal display face makes my job more safe. I use this meter alot to take amp reading in switch gear. I can set the meter up have the display in my hand and close the motor bucket and return power. Whlie getting my reading outside the gear with it closed. October 25, 2012
Great general meter This is a great all purpose meter, it has both AC and DC current plus the iFles makes it easy to measure large amperage multi-conductor switchgear. It comes with test least but it really needs the TL175 and TLK-225 to make it fully functional. This will handle most uses except inverter drive requiring a scope. I've used it for main industrial power, low voltage distribution (LED lighting), automotive, electrical troubleshooting and alarm install. It replaced 2 other meters and with the detachable display, one assistant. July 4, 2012
Great general meter This is a great all purpose meter, it has both AC and DC current plus the iFles makes it easy to measure large amperage multi-conductor switchgear. It comes with test least but it really needs the TL175 and TLK-225 to make it fully functional. This will handle most uses except inverter drive requiring a scope. I've used it for main industrial power, low voltage distribution (LED lighting), automotive, electrical troubleshooting and alarm install. It replaced 2 other meters and with the detachable display, one assistant. July 4, 2012
  • 2015-06-11T15:21:31.945-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_5, tr_5
  • loc_en_US, sid_73R7392, prod, sort_default
1-5 of 5
Back to top

Customer Q&A Exchange


(There are 2 questions : 2 answers on this product)

Product Q&A

Ask your questions. Share your answers.

 
 
Browse Q&A
 
 
Search Questions
Need Product Support?
If you need immediate technical support use Live Support or Contact Us.
This space is yours...
Use this space to Ask your peers product questions or Answer those questions posted by them.
Sort by
Details: 
Looking for a replacement battery for clamp meter (part number FLUKE-381)?
2 years, 9 months ago
by
NewarkTechSupp
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)

Answers

A: 
According to datasheet, this thermometer can be powered by 5 'AAA' sized batteries. Suggested part number of battery which can be used with this thermometer is PC2400BKD from Duracell.
2 years, 9 months ago
by
NewarkTechSupport
0points
0out of 0found this answer helpful.
Was this helpful?(0)(0)
2 years, 7 months ago
by
NewarkProductEnrichment01
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)

Answers

A: 
Description:
The new Fluke 381 does everything you would expect from a clamp meter, and then lets you remove the display for even more flexibility. Now one technician can do jobs that used to require two people; clamp the Fluke 381 around a conductor, remove the display and walk across the room to operate controls or remove protective equipment, all while watching real-time readings. The new iFlex™ flexible current probe (included) expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.

Feature & Benefits:
Wireless technology allows the display to be carried up to 30 ft away from the point of measurement
iFlex™ flexible current probe expands the measurement range with increased display flexibility
State of the art signal processing allows for use in noisy environments
Proprietary inrush measurement technology to filter out noise and capture motor starting current
Ergonomic design fits in your hand and can be used while wearing personal protective equipment
The removable magnetic display can be conveniently mounted where it is easily seen
Radio transmitter automatically turns off when the display is connected to the meter
Large, easy to read, backlight display automatically sets the correct measurement range

Applications: Industrial, Test & Measurement, Maintenance & Repair
2 years, 6 months ago
by
NewarkProductEnrichment1
0points
0out of 0found this answer helpful.
Was this helpful?(0)(0)
1 of 1
  • 2015-06-11T15:20:20.933-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_73R7392, prod, sort_default
1 of 1
Back to top

Community


Like to see information about this product from other customers?

 Read discussions, blogs, documents from our community members.

Filters:

Post a question to one of our experts or start a discussion and get responses from supplier experts and fellow engineers in our community.
Back to top

Associated Products


Customers Also Bought