Low

FAIR-RITE  2643102002  FERRITE CORE, CYLINDRICAL, 235OHM/100MHZ, 300MHZ

Image is for illustrative purposes only. Please refer to product description.

  • Manufacturer: FAIR-RITE
  • Newark Part No.: 24C4674
  • Manufacturer Part No 2643102002

Product Information


  • External Diameter: 25.9mm
  • Ferrite Grade: 43
  • Frequency Max: 300MHz
  • Frequency Min: 25MHz
  • Impedance @ 100Mhz: 235ohm
  • Inner Diameter: 12.8mm
  • Length: 28.6mm
  • SVHC: No SVHC (16-Jun-2014)

Find similar products  grouped by common attribute

View this product in our online catalog


This product also features on the following pages and catalog editions:

  •  129/679
  •  130/684

Availability

Availability:  8,568


  • 8,568 in stock for same day shipping
 
Check stock and lead times
    Per the manufacturer, more stock expected week of 1/26/15

Price for: Each 1

Minimum order quantity: 1

Order multiple quantity: 1

Price: $1.98

Buy

Price

Quantity List Price
1 - 9 $1.98
10 - 49 $1.82
50 - 99 $1.72
100 - 499 $1.55
500 - 999 $1.29
1000+ $1.21

Legislation and Environmental


Back to top

Similar Products


Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.

Back to top

Customer Reviews


FAIR-RITE - 2643102002 - FERRITE CORE, CYLINDRICAL, 235OHM/100MHZ, 300MHZ 5 5 1 1
X-10 signal on 120KHZ, isolator/filter I fabricated a filter / isolator to isolate a 120Khz X-10 carrier that is used to send digital commands via a homes power distribution wiring, for home automation control. Specs on this component did not show high attenuation at 120Khz, however I had several on had and proceeded with a tryout. I needed to pass up to 20 amps on a 120 volt circuit, but isolate the 120Khz signal from the power line noise filtering within the appliance as it was coupling most of the 120Khz signal to nuetral (GND). I found that 3 to 4 turns of a 12AWG cable was initially suffcient , but ended up looping 7 turns of 12AWG through this cylindrical part. It could allso be used to isolate "device" generated noise from the power line that may otherwise interfere with the home automation signaling. Most applications would not require as large as 12AWG, so additional turns could be wound for greater attenuation. It performed great at isolating the 120Khz while passing the 60Hz power without noticible loss. No appreciable heat was noticed at the ferrite component from the 60Hz current draw passing through the ferrite inductor. Also, I suspect this series inductive component could be beneficial in dampening of spike components from lightning as an added benefit. This product allowed for a simple and safe and cost effective soloution to be implemented quickly with allmost no failure modes to be had and no complex assembly. Win - win situation. August 10, 2011
1-1 of 1
Back to top

Customer Q&A Exchange


Community


Like to see information about this product from other customers?

 Read discussions, blogs, documents from our community members.

Filters:

Post a question to one of our experts or start a discussion and get responses from supplier experts and fellow engineers in our community.
Back to top

Associated Products


Customers Also Bought