Low

EPCOS  B66422W1010D001  Transformer Coil Former, 10 Pin, EFD25

EPCOS B66422W1010D001
Technical Data Sheet (391.81KB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

Product Overview

The B66422W1010D001 is a 10-pin GFR Thermosetting Plastic EFD 25/13/9 Coil Former for use with B66421 series. Ferrite cores have to meet mechanical requirements during assembling and for a growing number of applications. Since ferrites are ceramic materials one has to be aware of the special behaviour under mechanical load. As valid for any ceramic material, ferrite cores are brittle and sensitive to any shock, fast changing or tensile load. Especially high cooling rates under ultrasonic cleaning and high static or cyclic loads can cause cracks or failure of the ferrite cores. Stresses in the core affect not only the mechanical but also the magnetic properties. It is apparent that the initial permeability is dependent on the stress state of the core. The higher the stresses are in the core, the lower is the value for the initial permeability. Thus the embedding medium should have the greatest possible elasticity.
  • Ferrites can run hot during operation at higher flux densities and higher frequencies
  • The magnetic properties of NiZn-materials can change irreversible in high magnetic fields
  • UL94V-0 Flammability rating

 

Product Information

For Use With:
B66421
Product Range:
EFD25 Series
RoHS Compliant:
Yes
Accessory Type:
Coil Former
SVHC:
To Be Advised

Find similar products  grouped by common attribute

Applications

  • Industrial

Legislation and Environmental

Associated Products

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.