Low

LM6154BCM/NOPB - 

Operational Amplifier, Quad, 4 Amplifier, 75 MHz, 30 V/µs, 2.7V to 24V, SOIC, 14 Pins

TEXAS INSTRUMENTS LM6154BCM/NOPB

The actual product may differ from image shown

Manufacturer Part No:
LM6154BCM/NOPB
Newark Part No.:
41K6213
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
2.7V to 24V
:
0°C
:
-
:
Each
:
30V/µs
:
70°C
:
14Pins
:
SOIC
:
4 Amplifier
:
-
:
75MHz
:
MSL 1 - Unlimited
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The LM6154BCM/NOPB is a quad Operational Amplifier with rail-to-rail input and output. Using patented circuit topologies, the LM6154 provides new levels of speed vs. power performance in applications where low voltage supplies or power limitations previously made compromise necessary. With only 1.4mA/amplifier supply current, the 75MHz gain bandwidth of this device supports new portable applications where higher power devices unacceptably drain battery life. The slew rate of the devices increases with increasing input differential voltage, thus allowing the device to handle capacitive loads while maintaining large signal amplitude. The LM6154 can be driven by voltages that exceed both power supply rails, thus eliminating concerns about exceeding the common-mode voltage range. The rail-to-rail output swing capability provides the maximum possible dynamic range at the output. This is particularly important when operating on low supply voltages.
  • Fast settling time of 1.1µs for 2V step (to 0.01%)
  • 0.01 to 4.99V Rail-to-rail output swing
  • 1.4mA/amplifier Low supply current
  • 10μV/°C Typical offset drift
  • 91dB PSRR
  • 84dB CMRR
  • Green product and no Sb/Br

Applications

Portable Devices, Signal Processing, Sensing & Instrumentation

Substitutes

Associated Products