Low

AT91SAM9X25-EK - 

Evaluation Kit, Graphics LCD Controller, ARM926EJ MCU, 400MHz, Dual Ethernet and CAN, HS USB

The actual product may differ from image shown

Manufacturer:
MICROCHIP MICROCHIP
Manufacturer Part No:
AT91SAM9X25-EK
Newark Part No.:
68T5224
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
AT91SAM9xxx
:
SAM9X
:
32bit
:
ARM
:
Atmel
:
ARM926
:
Eval Board for AT91SAM9X25
:
-
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The AT91SAM9X25-EK is an evaluation kit that enables the evaluation and code development of applications running on a SAM9X25 device. The SAM9X25 is a High performance ARM926-based embedded microprocessor unit, running at 400MHz and featuring multiple networking/connectivity peripherals, optimized for industrial applications such as building automation, gateways and medical. The SAM9X25 features two 2.0A/B compatible controller area network (CAN) interfaces and two IEEE Std 802.3 compatible 10/100Mbps Ethernet MACs. Additional communication interfaces include a soft modem supporting exclusively the conexant SmartDAA line driver, HS USB device and host, FS USB host, two HS SDCard/SDIO/MMC interfaces, USARTs, SPIs, I2S,TWIs and 10bit ADC.
  • Consists of SAM9X25 400MHz CPU external memory DDR2-SDRAM (1Gb) NAND flash (2 or 4Gb)
  • Three USB ports and two high speed SD/MMC interfaces
  • HS (EHCI) and FS (OHCI) host, multiplexed with HS USB device via micro AB connector
  • HS (EHCI) and FS (OHCI) host, via standard type A connector
  • FS only (OHCI) host, via standard type A connector
  • Two Ethernet 10/100 interfaces with On board MAC controllers and RJ45 sockets
  • One stereo CODEC interface with line-in and headphone jacks
  • Two CAN interfaces and three serial interfaces (2x USART, 1x UART)
  • One telephone/modem interface with RJ11 connector
  • One Two Wire Interface (TWI) and one ZigBee extension port

Applications

Industrial, Building Automation, Medical, Automation & Process Control, Communications & Networking, Metering

Contents

One EK board with SAM9X25-CM CPU module, universal power supply with US, Europe and UKplug adapters, one 3V Lithium battery CR1225, one serial RS232 cable, one micro A/Btype USB cable, one RJ45 crossed cable.

Footnotes

One optional display module.

Warnings

The board must not be subjected to high electrostatic potentials. In risky ESD environments a grounding strap or similar protective device should be worn when handling the board.

Associated Products

Compare Selected