Low

ATMEL  AT91SAM9G20B-CU  32 Bit Microcontroller, ARM Thumb, ARM9, 400 MHz, 64 KB, 32 KB, 217 Pins, BGA

Product Overview

The AT91SAM9G20B-CU is a SMART Embedded Microprocessor unit based on the integration of an ARM926EJ-S processor with fast ROM and RAM memories and a wide range of peripherals. The SAM9G20 embeds an Ethernet MAC, one USB device port and a dual port USB host controller with on-chip USB transceivers. It also integrates several standard peripherals, such as the USART, SPI, TWI, Timer counters, Synchronous Serial Controller, ADC and MultiMedia card Interface. The SAM9G20 is architectured on a 6-layer matrix, allowing a maximum internal bandwidth of six 32-bit buses. It also features an External bus interface capable of interfacing with a wide range of memory devices. The SAM9G20 is an enhancement of the SAM9260 with the same peripheral features. It is pin-to-pin compatible with the exception of power supply pins. Speed is increased to reach 400MHz on the ARM core and 133MHz on the system bus and EBI.
  • Incorporates the ARM926EJ-S ARM Thumb processor
  • One 64kB Internal ROM, single-cycle access at maximum matrix speed
  • Two 16kB internal SRAM, single-cycle access at maximum matrix speed
  • External bus interface (EBI)
  • USB 2.0 full speed (12Mbps) device port
  • USB 2.0 full speed (12Mbps) host double port
  • Ethernet MAC 10/100 Base T
  • Image sensor interface
  • Bus matrix
  • Reset controller (RSTC)
  • Clock generator (CKGR)
  • Power management controller (PMC)
  • Advanced interrupt controller (AIC)
  • Debug unit (DBGU)
  • Periodic interval timer (PIT)
  • Watchdog timer
  • Real-time timer (RTT)
  • One 4-channel 10-bit Analog-to-digital converter
  • Three 32-bit Parallel I/O controllers (PIOA, PIOB, PIOC)
  • Peripheral DMA controller channels (PDC)

 

Product Information

Architecture:
ARM9
CPU Speed:
400MHz
Program Memory Size:
64KB
RAM Memory Size:
32KB
No. of Pins:
217Pins
MCU Case Style:
BGA
No. of I/O's:
96I/O's
Embedded Interface Type:
EBI, EMI, ENET, I2C, SPI, SSC, UART, USART
Supply Voltage Min:
900mV
Supply Voltage Max:
1.1V
Packaging:
Each
Product Range:
SMART ARM based Microcontrollers
Automotive Qualifications Standard:
-
No. of PWM Channels:
2
No. of Timers:
6
MPU Core Size:
32bit
MSL:
MSL 3 - 168 hours
Peripherals:
POR, WDT
Operating Temperature Min:
-40 °C
Operating Temperature Max:
85 °C
Supply Voltage Range:
0.9V to 1.1V
Oscillator Type:
External, Internal
SVHC:
No SVHC (15-Jun-2015)
Controller Family/Series:
(ARM9)

Find similar products  grouped by common attribute

Applications

  • Automation & Process Control

Legislation and Environmental

Moisture Sensitivity Level:
MSL 3 - 168 hours
RoHS Compliant:
Yes
Authorized Distributor

Associated Products