Low

AT91SAM7S64C-AU - 

ARM Microcontroller, SAM7S Series, ARM7TDMI, 32bit, 55 MHz, 64 KB, 16 KB, 64 Pins

The actual product may differ from image shown

Manufacturer:
MICROCHIP MICROCHIP
Manufacturer Part No:
AT91SAM7S64C-AU
Newark Part No.:
68T5165
Product Range
SMART ARM based Microcontrollers
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
32I/O's
:
32bit
:
55MHz
:
Each
:
64Pins
:
ARM7TDMI
:
I2C, SPI, SSC, UART, USART
:
LQFP
:
1.65V
:
64KB
:
SMART ARM based Microcontrollers
:
1.95V
:
16KB
:
MSL 3 - 168 hours
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The AT91SAM7S64C-AU is a SMART ARM®-based Microcontroller, member of the SAM7S series of flash microcontrollers based on the 32-bit ARM7TDMI® RISC processor. It operates at a maximum speed of 55MHz and features 32kB of flash memory and 16kB of SRAM. The peripheral set includes a full speed USB device and PHY at 12Mbps, UART, two USARTs, TWI I²C), SPI, SSC, two PWM timers, three 16-bit timers, RTT, 8x10-bit ADC and 32 IO lines. It achieves single-cycle instruction access from embedded flash at 27 MIPS. The multi-layer bus matrix, multiple SRAM banks, PDC and DMA support parallel tasks and maximize data throughput. The SAM7S64 operates from 1.65 to 3.6V. The SAM7S series has a static current of less than 60μA on VDDCORE at 25°C, including the RC oscillator, the voltage regulator and the power-on reset. When the brown-out detector is activated, 20μA static current is added. The dynamic power consumption on VDDCORE is less than 50mA at full speed when running out of the flash.
  • Incorporates the ARM7TDMI® ARM® Thumb® processor
  • High-performance 32-bit RISC architecture
  • High-density 16-bit instruction set
  • Leader in MIPS/Watt
  • EmbeddedICE™ In-circuit emulation, debug communication channel support
  • Internal high-speed flash
  • Internal high-speed SRAM - Single-cycle access at maximum speed
  • Memory controller (MC) - Embedded flash controller, abort status and misalignment detection
  • Reset controller (RSTC) - Provides external reset signal shaping and reset source status
  • Clock Generator (CKGR) - Low-power RC oscillator, 3 to 20MHz on-chip oscillator and one PLL
  • Power management controller (PMC) - Three programmable external clock signals
  • Advanced Interrupt Controller (AIC)
  • Debug unit (DBGU)
  • Periodic Interval Timer (PIT) - 20-bit programmable counter plus 12-bit interval counter
  • Windowed Watchdog (WDT) - 12-bit key-protected programmable counter
  • Real-time timer (RTT) - 32-bit free-running counter with alarm
  • One parallel input/output controller (PIOA)
  • One USB 2.0 full speed (12Mbps) device port
  • One synchronous serial controller (SSC)
  • Two universal synchronous/asynchronous receiver transmitters (USART)

Applications

Industrial

Associated Products