STM 32 I/O Bridge, Raspberry Pi, Arduino, 32Bit ARM Cortex M3, Arduino Compatible Connector

EMBEDDED PI - STM 32 I/O Bridge, Raspberry Pi, Arduino, 32Bit ARM Cortex M3, Arduino Compatible Connector

The actual product may differ from image shown

Manufacturer Part No:
Newark Part No.:
Technical Datasheet:
See all Technical Docs

Product Information

8 / 32bit
Embedded Pi Board, 4x Plastic Standoffs, 26 Way Ribbon Cable, 10 Way Ribbon Cable
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

Embedded Pi is a triple play platform for Raspberry Pi, Arduino and 32bit embedded ARM. Blending all three communities together, Embedded Pi helps to get the most out of each platform. The Embedded Pi is based on the STMicroelectronics STM32F103 MCU, and can operate as a bridge between Raspberry Pi and Arduino shields and in standalone mode as a Cortex-M3 evaluation board. Embedded Pi has three operation modes, selectable by jumpers, to full fill all the possibilities of operation to get most out of all. The three modes are STM32/standalone mode, ST-Adapter mode and Raspberry Pi mode.
  • Provides Raspberry Pi with easy access to abundant Arduino shields
  • Brings 32bit ARM MCU into the world of Arduino
  • Raspberry Pi and STM32 can work with each other to control the Arduino shields or other accessories
  • 128KB of flash memory and 20KB of SRAM
  • Form factor compatible with Arduino shields
  • Enhances the control capability of Raspberry Pi
  • A complete set of FREE CooCox ARM development tool platform for ARM development


Embedded Design & Development, Sensing & Instrumentation, Motor Drive & Control, Hobby & Education, Communications & Networking


Embedded Pi board, USB 2.0 cable, Two flat cables, Four rubber columns, Technical documents.


Compatible with Raspberry Pi Model A/B


Compare Selected
Manufacturer Part Number
Newark Part No.
Manufacturer / Description
Price For

Associated Products

Compare Selected

Related Searches

US continental orders over $49 and under 50 pounds may qualify for free ground shipping. Click the link for the full Terms and Conditions of the offer.

3,125 In stock

for same day shipping

see cut-off times
Check stock and lead times
More stock available week commencing 10/8/18
$9.99 $ 9.99
Price for:
Multiple: 1 Minimum: 1
Quantity Price Your Price
1 + $24.84
No longer stocked:: No Longer Manufactured::
Add to Cart
Add Line Note
Total Price:
Total Price: ( )
Total Price: --

Customer Reviews

Great option for embedded controller prototyping Before you get too influenced by the Rasberry Pi fanatics, decide what you need to do and then select this if it fits your need. If you need the full Rasberry Pi then get that but it's WAY overkill for the majority of embedded designs that you might consider doing with Atmel/Arduino stuff but need more processing capability or just don't want to do a bunch of work on old hardware and want to have some headroom. What this really is is a Cortex M3 embedded controller prototyping board or small volume/one off applications. Great because it's better supported than a lot of other Cortex M3 based boards. Plus it provides a bridge to Rasberry Pi stuff if you need that. I found this a great option to Due as I prefer STM to the Atmel M3 implementation. July 15, 2013
How about two strikes Hardware is excellent. Right out of the box you can use discrete I/o with your Rpi. That's it. No Analogs without programming it with another Ide and hardware debugger that. only runs on windows. Debugger not included. If you are a skilled user of Coocox ide and stm programming, the thing will dance for you. Otherwise, there's just a couple of demos out there, partially implemented, and you cant run those without buying the debugger and setting up coide on a pc running windows. I have jumped all of the hurdles, and can't figure out what makes this as good as serially connecting pi to an uno. June 23, 2013
not too useful, I think... I see lots of applications which hook up sensors diectly to a raspi. But the raspi, it seems to me, is a much better option as a gateway for dozens of sensors; all the sensors in your home, for example; wirelessly accessibly via radio based sensors, like xbee... This seems fun for a one time project that needs an arduino attached to a raspi... May 10, 2013
No Linux Version of IDE/Debugger Looks like an interesting part, would be very interested if the IDE / Debug tools are ported to Linux May 10, 2013
  • 2015-06-11T15:21:50.214-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_4, tr_4
  • loc_en_US, sid_67W2379, prod, sort_default
1-4 of 4

Customer Q&A Exchange


Like to see information about this product from other customers?

 Read discussions, blogs, documents from our community members.


Select document type(s) you want to see and click “Apply Filters” button
Post a question to one of our experts or start a discussion and get responses from supplier experts and fellow engineers in our community.