Low

ECSNOASC - 

Current Switch, CurrentWatch™ ESC Series , Solid Core, 1A to 150A, Normally Open

EATON CUTLER HAMMER ECSNOASC

The actual product may differ from image shown

Manufacturer Part No:
ECSNOASC
Newark Part No.:
08N7305
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
Current
:
120ms
:
1A to 150A
:
-
:
-
:
1A to 150A
:
-
:
-
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The ECSNOASC is a 19mm aperture solid-state adjustable Current Switch ideal for providing status information on electrical equipment. It is excellent for new installations, where the conductors run through the housing, requiring no cutting. The current switch is accurate, reliable and easy to install. It can sense continuous currents from 1 to 150A set-point with LED configuration and does not require any supply voltage, as the power required is induced from the monitored conductor. The output is a non-polarity-sensitive solid-state contact for switching AC and DC circuits up to 240VAC/DC. This switch also includes an LED indicating two states on and below trip point and above trip point with contacts energized. Any change in current can be sensed with the device. A change in current may indicate motor failure, belt loss/slippage or mechanical failure. Any of these events can cause the current to drop significantly, tripping the switch and notifying the controller.
  • Ideal for retrofits
  • Normally open output
  • Easily adjustable set point - Increases application flexibly and speeds start-up
  • LED indication - Provides quick visual indication of contact status
  • Self-powered

Applications

Sensing & Instrumentation, Lighting, Motor Drive & Control

Warnings

This sensor is not a safety device and is not intended to be used as a safety device.