DIGILENT  CHIPKIT MAX32  Development Board, TDGl003, ChipKit, MAX32, PIC32 , Arduino Compatible, Open-source

DIGILENT CHIPKIT MAX32

Image is for illustrative purposes only. Please refer to product description.

  • Manufacturer:
  • Newark Part No.: 47T1475
  • Manufacturer Part No CHIPKIT MAX32

Product Overview


The chipKIT MAX32 development boards are the first 32bit MCU-based platforms that are compatible with existing Arduino hardware and software. The chipKIT Network Shield is an i/o expansion-board designed for use with the chipKIT Max32. It provides the additional circuitry and connectors to allow the advanced communications features of the PIC32MX795F512L on the Max32 to be utilized. It provides a 10/100Mbps Ethernet PHY to allow connection to an Ethernet network, the connectors and load switch to support use of the USB 2.0 OTG controller to implement USB device, USB host or OTG operation. It also provides 2 CAN transceivers and connectors to allow connection to 2 independent CAN networks. Connectors are provided to allow connection to 2 of the I2C busses supported by the Max32. In addition to the communications features, the Network Shield also adds a 256Kbit I2C EEPROM for non-volatile data storage and a 32.768KHz oscillator to allow use of the RTCC peripheral in the PIC32 MCU.
  • Features PIC32MX795F512L MCU
  • Compatible footprint with the Arduino Mega2560
  • Provides advanced communications and memory
  • Development using an environment based on the original Arduino IDE
  • Pin-out compatibility with many existing Arduino shields
  • Higher performance at a lower price-point than existing solutions
  • Advanced capabilities including: integrated USB (Device/Host, OTG), integrated Ethernet, CAN
  • SMSC LAN8720 10/100 Ethernet PHY
  • Two MCP2551 CAN transceivers, two 12 pin header connectors for CAN, two I2C daisy chain connectors
  • 256Kbit I2C EEPROM, 32.768 KHz oscillator

Applications

Communications & Networking; Wireless; Sensing & Instrumentation; Motor Drive & Control; Hobby & Education
Applying more than 6V to the external power I/P destroy 3.3V regulator when jumper in BYP position
Back to top

Product Information


  • Silicon Manufacturer Microchip
  • Core Architecture MIPS
  • Core Sub-Architecture PIC32
  • Silicon Core Number PIC32MX
  • Silicon Family Name PIC32MX795Fxxxx
  • No. of Bits 32bit
  • Kit Contents Board only
  • Features Arduino Compatible, Open-source Software/Hardware, Advance Communication and Memory
  • Product Range -
  • SVHC To Be Advised
  •   element14 Technical Page (382.13KB) EN
  • Manufacturer Product Page (143.26KB) EN
  • Availability

    Availability:  16


    • 16 in stock for same day shipping
     
    Check stock and lead times
    • 22 Further stock expected to ship on May 19, 2016
    • More stock available week commencing 6/13/16

    Price for: Each

    Minimum order quantity: 1

    Order multiple quantity: 1

    Price: $39.72 $39.72

    Buy

    Price

    Quantity List Price
    1+ $39.72
     
     
    Low

    Legislation and Environmental


    Back to top

    Similar Products

    Related Videos


    Customer Reviews


    Customer Q&A Exchange

    (There are 2 questions : 2 answers on this product)

    Product Q&A

    Ask your questions. Share your answers.

     
     
    Browse Q&A
     
     
    Search Questions
    Need Product Support?
    If you need immediate technical support use Live Support or Contact Us.
    This space is yours...
    Use this space to Ask your peers product questions or Answer those questions posted by them.
    Sort by
    Details: 
    Please could you provide more information on CHIPKIT MAX32 Product ?
    2 years, 8 months ago
    by
    NewarkProductEnrichment01
    0points
    0out of 0found this question helpful.
    Was this helpful?(0)(0)

    Answers

    A: 
    Description:
    The chipKIT MAX32 development boards are the first 32bit MCU-based platforms that are compatible with existing Arduino hardware and software.The chipKIT Network Shield is a i/o expansion board designed for use with the chipKIT Max32. It provides the additional circuitry and connectors to allow the advanced communications features of the PIC32MX795F512L on the Max32 to be utilized. It provides a 10/100Mbps Ethernet PHY to allow connection to an Ethernet network, the connectors and load switch to support use of the USB 2.0 OTG controller to implement USB device, USB host or OTG operation. It also provides 2 CAN transceivers and connectors to allow connection to 2 independent CAN networks. Connectors are provided to allow connection to 2 of the I2C busses supported by the Max32. In addition to the communications features, the Network Shield also adds a 256Kbit I2C EEPROM for non-volatile data storage and a 32.768KHz oscillator to allow use of the RTCC peripheral in the PIC32 MCU.

    Feature & Benefits:
    Features PIC32MX795F512L MCU
    Compatible footprint with the Arduino Mega2560
    Provides advanced communications and memory
    Development using an environment based on the original Arduino IDE
    Pin-out compatibility with many existing Arduino shields
    Higher performance at a lower price-point than existing solutions
    Advanced capabilities including: integrated USB (Device/Host, OTG), integrated Ethernet, CAN
    SMSC LAN8720 10/100 Ethernet PHY
    Two MCP2551 CAN transceivers, two 12 pin header connectors for CAN, two I2C daisy chain connectors
    256Kbit I2C EEPROM, 32.768 KHz oscillator

    Applications: Communications & Networking, Wireless, Sensing & Instrumentation, Motor Drive & Control, Hobby & Hardware Hacking

    Warnings:
    Applying more than 6V to the external power I/P destroy 3.3V regulator when jumper in BYP position
    2 years, 7 months ago
    by
    NewarkProductEnrichment1
    0points
    0out of 0found this answer helpful.
    Was this helpful?(0)(0)
    2 years, 3 months ago
    by
    r1653
    0points
    0out of 0found this question helpful.
    Was this helpful?(0)(0)

    Answers

    A: 
    CHIPKIT MAX32 is an Development board that combines compatibility with the popular Arduino open source hardware prototyping platform with the performance of the Microchip PIC32 microcontroller.

    The connectors in the board are (compatible) meant to interface with standars Arduino shields as well as larger shields for use with this Mega boards.

    for more details refer to below link:
    http://www.element14.com/community/docs/DOC-38042
    2 years, 3 months ago
    by
    TechGTC
    0points
    0out of 0found this answer helpful.
    Was this helpful?(0)(0)
    1 of 1
    • 2015-06-11T15:21:32.073-05:00
    • bvseo_lps, prod_bvqa, vn_prr_5.6
    • cp-1, bvpage1
    • co_hasquestionsanswers
    • loc_en_US, sid_47T1475, prod, sort_default
    1 of 1

    Community

    Like to see information about this product from other customers?

     Read discussions, blogs, documents from our community members.

    Filters:

    Post a question to one of our experts or start a discussion and get responses from supplier experts and fellow engineers in our community.

    Associated Products


    Customers Also Bought