Low

CORNELL DUBILIER  PSU4335B  Electrolytic Capacitor, Snap-in, 43 µF, 220 VAC, PSU Series, ± 20%, Quick Connect, Snap-In, 36.5 mm

CORNELL DUBILIER PSU4335B
Technical Data Sheet (257.08KB) EN See all Technical Docs

The actual product may differ from image shown

Product Overview

The PSU series Non-polarized Aluminium Electrolytic AC motor start Capacitor constructed in a round rugged bakelite case with dual voltage rated. To extend the life of relay contact switches, the PSU can be purchased with optional bleeder resistors assembled with 1/4-inch quick-connect terminals. An optional mounting system consisting of a bracket that is attached to the capacitor case with one end cap is available. The PL end caps are for use with wiring through the bracket to the motor and the PLA end caps are for off motor mounting.
  • Dual quick-connect terminals
  • Resistor options
  • Mounting options
  • Meets EIA RS-463 type 2 (normal performance)
  • Listed under UL file no. E128034
  • -40 to 65°C Temperature range
  • 110 to 330VAC Rated voltage range
  • 21 to 1280µF Rated capacitance range

 

Product Information

Capacitance:
43µF
Voltage Rating:
220VAC
Product Range:
PSU Series
Capacitance Tolerance:
± 20%
Capacitor Terminals:
Quick Connect, Snap-In
Diameter:
36.5mm
Lead Spacing:
12.7mm
Operating Temperature Min:
-40°C
Operating Temperature Max:
65°C
Height:
85.7mm
Lifetime @ Temperature:
5000 hours @ 105°C
ESR:
-
Automotive Qualifications Standard:
-
SVHC:
No SVHC (17-Dec-2015)

Find similar products  grouped by common attribute

Applications

  • Industrial

Legislation and Environmental

RoHS Compliant:
Yes
Authorized Distributor

Associated Products