Low

COMUS (ASSEMTECH)  CW1300-1  TILT SWITCH

COMUS (ASSEMTECH) CW1300-1
Technical Data Sheet (1.43MB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

Product Overview

The CW1300-1 from Comus is a non mercury tilt sensor. These operate when tilted from the horizontal position. The switch movement required to cause contact change is called the differential angle. It is very important when designing a tilt switch to allow the differential angle and understand that when in the horizontal position the switch contact may be open or closed.
  • Maximum switching voltage is 60VAC/DC
  • Maximum switching current is 0.25A
  • 22.3mm length
  • 4.7mm diameter
  • Maximum switching capacity is 3VA
  • Maximum contact resistance is 30 ohm
  • Make angle is 10° below horizontal, break angle is 10° above horizontal and 15°differential angle
  • Operating temperature range from -37° to 100°C
  • Tin plated case material
  • Hermetically sealed & inert gas filled sensor

 

Product Information

Sensor Body Material:
Nickel
Beam Angle:
15°
Output Current:
250mA
Switching Voltage:
60VAC
Product Range:
CW1300 Series
SVHC:
To Be Advised

Find similar products  grouped by common attribute

Applications

  • Industrial;
  • Consumer Electronics;
  • Portable Devices

Legislation and Environmental

RoHS Compliant:
Yes
Independent Distributor

Associated Products

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.