Low

WMT-1A - 

Audio Transformer, 10 kohm, 600 ohm, Panel

BOGEN COMMUNICATIONS WMT-1A

The actual product may differ from image shown

Manufacturer Part No:
WMT-1A
Newark Part No.:
96F516
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
10kohm
:
-
:
Panel
:
-
:
600ohm
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The WMT-1A is an Audio Transformer designed especially for impedance-matching inputs from or outputs to a 600Ω line. It has a Hi-Z, 10kΩ primary impedance and a Lo-Z, 600Ω secondary impedance balanced with a center tap. As an input-matching transformer, it may be used to connect telephone systems to most Bogen public address amplifiers for telephone paging. It also functions as an output-matching transformer in feeding program material over a 600Ω telephone line (typically for "music-on-hold" applications). It is compatible with any amplifier having a 25V output terminal. Line input or output connections from the 600Ω line shall be made via a three-screw terminal strip. Connection to the auxiliary input of an amplifier shall be by means of a shielded cable terminated in an RCA plug. Provisions shall be included to connect the unit to a microphone input. The mounting bracket shall allow the transformer to be mounted by means of two steel screws.
  • Hi-Z, 10kΩ Primary impedance
  • Lo-Z, 600Ω secondary impedance, balanced with center tap
  • Matches high-to-low impedance or low-to-high impedance
  • Adapts line-level signals to microphone inputs
  • RCA connector for Hi-Z side
  • Screw terminals for Lo-Z side
  • Small steel enclosure with mounting ears allows easy mounting
  • No wiring or soldering required
  • May be used to provide a 600Ω output from a Bogen mixer/pre-amplifier

Applications

Power Management, Audio