Low

BERGQUIST  K10-54  Thermal Insulator, Sil-Pad, K-10, .006", TO-220, PI (Polyimide) Film, 1.3 W/m.K, 6 kV, 0.152 mm

BERGQUIST K10-54
Technical Data Sheet (44.46KB) EN See all Technical Docs

The actual product may differ from image shown

Product Overview

Sil-Pad K-10 is a high performance insulator. It combines special film with a filled silicone rubber. The result is a product with good cut-through properties and excellent thermal performance. Sil-Pad K-10 is designed to replace ceramic insulators such as Beryllium Oxide, Boron Nitride, and Alumina. These insulators are expensive and they break easily. Sil-Pad K-10 eliminates breakage and costs much less than ceramics.
  • Thermal impedance 0.41°C-in2/W (@50 psi)
  • 0.2℃/W thermal resistance
  • Tough dielectric barrier against cut-through
  • Electrically isolating to 6kV (min)
  • High performance film
  • Designed to replace ceramic insulators

 

Product Information

Insulator Body Material:
PI (Polyimide) Film
Thermal Conductivity:
1.3W/m.K
Breakdown Voltage Vbr:
6kV
Thickness:
0.152mm
Volume Resistivity:
10ohm-m
Thermal Impedance:
0.86°C/W
Dielectric Strength:
-
Product Range:
-
SVHC:
To Be Advised

Find similar products  grouped by common attribute

Legislation and Environmental

RoHS Compliant:
Yes
Independent Distributor

Substitutes

Associated Products

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.