Low

9239 010100 - 

Coaxial Cable, Black, 26 AWG, 7 x 34AWG, 100 ft, 30.48 m

BELDEN 9239 010100

The actual product may differ from image shown

Manufacturer:
BELDEN BELDEN
Manufacturer Part No:
9239 010100
Newark Part No.:
03F2133
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
-
:
Copper
:
2.57mm
:
26AWG
:
30.48m
:
PVC
:
100ft
:
7 x 34AWG
:
RG174
:
Black
:
-
:
50ohm
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The 9239 010100 is a 100ft 1-conductor RG-174/U low noise Coaxial Cable with 26AWG stranded (7 x 34) bare copper-covered steel conductor, polyethylene for layer 1 and conductive PVC for layer 2 insulation, TC braid shield (90% coverage) and black PVC jacket. This coaxial cable is perhaps the most common, basic and easy-to-understand cables. Basically, they are used to transmit electrical energy or signals, from one location to another, to connect a source to a load, such as a transmitter to an antenna. Coaxial cable (coax) is typically identified or classified according to its impedance or RG-type. Belden® coaxial cable is tested with equipment that simulates every known environmental and electrical performance condition. As a result, this cable can be counted on for positive, reliable and trouble-free operation.
  • 50Ω Impedance
  • 38pF/ft Conductor to shield nominal capacitance
  • 62% Nominal velocity of propagation
  • 97Ω/1000ft at 20°C Nominal conductor DC resistance
  • 14Ω/1000ft at 20°C Nominal outer shield DC resistance

Applications

Signal Processing

Associated Products