BANNER ENGINEERING  OTBVP6LQD  Photoelectric Sensor, Optical Touch, OTB Series, PNP, 10 V to 30 V, Quick Disconnect

Technical Data Sheet (180.96KB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

Product Overview

The OTBVP6LQD is an Optical Touch Button thats touch-activated photoelectric switch designed to replace capacitive touch switches and mechanical push buttons. The OPTO-TOUCH's SPDT electromechanical relay or solid-state output (depending upon model) is activated for as long as a finger, introduced into the "touch area" (yoke) of the switch, interrupts the OPTO-TOUCH's infrared sensing beam. Banner Optical Touch Buttons are ergonomically designed to eliminate the hand, wrist and arm stresses associated with mechanical push buttons. They require absolutely no physical pressure to operate. LED indicators light for "power on" and "output activated". All models are highly resistant to EMI, RFI and ambient light interference. OTBs have either a black polysulfone (or red Lexan®) upper housing and VALOX® base. The 30mm threaded base on all models provides easy mounting and Banner Optical Touch Buttons are easily retrofitted to existing machines.
  • All models have SPDT electromechanical relay, one N.O. contact, one N.C. contact
  • 150mA Maximum load
  • 120,000lux Ambient light immunity (direct sunlight)
  • Two indicator LEDs
  • Quick-disconnect (QD) cable


Product Information

Sensor Output:
Sensing Range Max:
Supply Voltage DC Min:
Supply Voltage DC Max:
Output Current:
Product Range:
OTB Series
No SVHC (20-Jun-2016)

Find similar products  grouped by common attribute


  • Sensing & Instrumentation

Legislation and Environmental

Product Traceability
RoHS Compliant:

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.