Low

BANNER ENGINEERING  GM-FA-10J  Safety Relay, SPST-NO, SPST-NC, 24 V, 6 A, GM-FA Series, DIN Rail, Screw

BANNER ENGINEERING GM-FA-10J
Technical Data Sheet (642.85KB) EN See all Technical Docs

The actual product may differ from image shown

Product Overview

The GM-FA-10J is a 2-pole Gate Monitoring Safety Module. 1NO-1NC contact configuration. It is used to verify the proper operation of coded magnetic safety switches and positive-opening safety switches by monitoring a normally open (NO) and a normally closed (NC) contact from each switch. It can also be used to monitor and verify the correct state of two redundant current-sourcing PNP signals. In a typical application, two safety switches (individually mounted) indicate the open or closed status of a gate, moveable guard or barrier. Plug-in terminal blocks. If terminal blocks are swapped, Module remains functional with no loss of safety function.
  • Monitors one or two safety switches for a contact failure or wiring fault
  • Two output switching channels for connection to control-reliable power interrupt circuits
  • Auto reset or monitored manual reset

 

Product Information

Contact Configuration:
SPST-NO, SPST-NC
Coil Voltage:
24V
Contact Current:
6A
Product Range:
GM-FA Series
Relay Mounting:
DIN Rail
Relay Terminals:
Screw
Contact Voltage AC Nom:
250V
Contact Voltage DC Nom:
24V
Contact Material:
Silver Nickel
IP Rating:
Not Rated
Approvals & Standards:
-
External Width:
22.5 mm
Coil Voltage VAC Nom:
24 V
No. of Poles:
2
Approvals / Standards:
-
Coil Resistance:
270 ohm
External Height:
84 mm
Contact Current Max:
6 A
SVHC:
No SVHC (20-Jun-2016)
External Depth:
118 mm
Coil Voltage VDC Nom:
24 V

Find similar products  grouped by common attribute

Applications

  • Industrial;
  • Power Management;
  • Automation & Process Control

Legislation and Environmental

Product Traceability
RoHS Compliant:
Yes
Authorized Distributor

Associated Products

Similar Products