Low

ATMEGA128-16MU - 

8 Bit Microcontroller, Low Power High Performance, ATmega, 16 MHz, 128 KB, 4 KB, 64 Pins, MLF

MICROCHIP ATMEGA128-16MU

The actual product may differ from image shown

Manufacturer:
MICROCHIP MICROCHIP
Manufacturer Part No:
ATMEGA128-16MU
Newark Part No.:
68T2503
Product Range
ATMega Microcontrollers
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
53I/O's
:
16MHz
:
-
:
Each
:
ATmega
:
64Pins
:
I2C, SPI, UART
:
MLF
:
4.5V
:
128KB
:
ATMega Microcontrollers
:
5.5V
:
4KB
:
MSL 2 - 1 year
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The ATMEGA128-16MU is a high-performance, low-power 8-bit AVR RISC-based Microcontroller combines 128kB of programmable flash memory, 4kB SRAM, a 4kB EEPROM, an 8-channel 10-bit A/D converter and a JTAG interface for on-chip debugging. The device supports throughput of 16MIPS at 16MHz and operates between 4.5 to 5.5V. By executing instructions in a single clock cycle, the device achieves throughputs approaching 1MIPS per MHz, balancing power consumption and processing speed. The device is manufactured using the Atmel high-density nonvolatile memory technology. The on-chip ISP flash allows the program memory to be reprogrammed in-system through an SPI serial interface, by a conventional non-volatile memory programmer, or by an on-chip boot program running on the AVR core. The boot program can use any interface to download the application program in the application.
  • Advanced RISC architecture
  • Power-on reset and programmable brown-out detection
  • Internal calibrated RC oscillator
  • External and internal interrupt sources
  • Six sleep modes - idle, ADC noise reduction, power-save, power-down, standby and extended standby
  • Software selectable clock frequency
  • ATmega103 compatibility mode selected by a fuse
  • Global pull-up disable
  • QTouch® library support
  • JTAG (IEEE std. 1149.1 compliant) interface
  • Two 8-bit timers/counters with separate prescalers and compare modes
  • Two expanded 16-bit timers/counters with separate prescaler, compare mode and capture mode
  • Real-time counter with separate oscillator
  • Two 8-bit PWM channels
  • 6 PWM channels with programmable resolution from 2 to 16-bits
  • Output compare modulator
  • Byte-oriented two-wire serial interface
  • Dual programmable serial USARTs
  • Master/Slave SPI serial interface
  • Programmable watchdog timer with on-chip oscillator

Applications

Industrial

Substitutes

Associated Products

Compare Selected