ATMEL  ATAVRMC300  MOTOR POWER BOARD, BDC/STEPPER MOTOR

ATMEL ATAVRMC300

Image is for illustrative purposes only. Please refer to product description.

Additional images

  • Manufacturer:
  • Newark Part No.: 68T2068
  • Manufacturer Part No ATAVRMC300

Product Overview


The ATAVRMC300 is an general purpose power stage board able to drive brushless DC, brushed DC and stepper motors. Designed as a flexible platform for developing motor control applications, it works with ATAVRMC3xx processor boards. The board is designed to be a flexible platform for developing motor control applications. Power and all signals needed for a controller (AVR CPU) are available on the left side of the board, giving a modular system where boards with different microcontrollers can easily be connected. The MC300 motor control driver board is a power stage board intended for driving BLDC and stepper motors. It has four half bridges with independent control of high and low sides. Each bridge has options for filtered/voltage divided feedback from its output (EMF) and shunt resistor. The MC300 driver board can directly connect to an AVR device board. This is accomplished by a horizontal female 0.1" pin header connector located on the left side of the board.
  • General purpose power stage for DC and stepper motors
  • Modular system with 2,54mm pin header connector for device boards
  • Four half bridges with independent control of high and low side
  • On board voltage regulators for device board (5/3.3V) and Hall sensors (5V)
  • Hall sensor, back-EMF and centre voltage feedback to device board
  • Shunt resistor feedback to device board
  • Driver circuit: Vin 10 to 20V and Motor: Vm 0 to 40V, Im(max)=6A

Applications

Motor Drive & Control; Industrial; Consumer Electronics; Medical; Automotive
The gate voltage to the high side MOS is powered by a bootstrap capacitor. To sustain this high side must be turned off Periodically, allowing the capacitor to be recharged via a diode.
Back to top

Product Information


  • Silicon Manufacturer Atmel
  • Silicon Core Number ATmega16M1, ATmega32M1, ATtiny861A, ATtiny861
  • Kit Application Type Power Management - Motor Control
  • Application Sub Type DC Brushless Motor
  • Core Architecture AVR
  • Core Sub-Architecture megaAVR, tinyAVR
  • Silicon Family Name ATmega
  • Kit Contents -
  • Features Flexible Platform for Motor Control Application Development, BLDC Motor Basics
  • Product Range -
  • SVHC No SVHC (15-Jun-2015)

Availability

Availability: Not Currently Stocked

 
 
Low

Legislation and Environmental


Back to top
Back to top

Customer Reviews


Customer Q&A Exchange

Community

Like to see information about this product from other customers?

 Read discussions, blogs, documents from our community members.

Filters:

Post a question to one of our experts or start a discussion and get responses from supplier experts and fellow engineers in our community.

Associated Products


Customers Also Bought