Low

ATMEL  AT91SAM9X35-EK  Evaluation Kit, Ethernet, Zigbee, 32bit, 400MHz CPU, Graphics LCD Controller

Technical Data Sheet (425.19KB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

ATMEL AT91SAM9X35-EK
ATMEL AT91SAM9X35-EK
ATMEL AT91SAM9X35-EK
ATMEL AT91SAM9X35-EK
ATMEL AT91SAM9X35-EK
Video

Product Overview

The AT91SAM9X35-EK is an evaluation kit that enables the evaluation and code development of applications running on a SAM9X35 device. The SAM9X35 is a highly integrated 400MHz ARM926 embedded MPU, featuring an extensive peripheral set and high bandwidth architecture for industrial applications that require refined user interfaces and high speed communication. The SAM9X35 features a graphics LCD controller with 4 layer overlay and 2D acceleration (picture-in-picture, alpha-blending, scaling, rotation, colour conversion), and a 10bit ADC that supports 4 or 5 wire resistive touch screen panels. Networking/connectivity peripherals include two 2.0A/B compatible controller area network (CAN) interfaces and an IEEE Std 802.3-compatible 10/100Mbps Ethernet MAC. Multiple communication interfaces include a soft modem supporting exclusively the conexant SmartDAA line driver, HS USB device and host, FS USB host, two HS SDCard/SDIO/MMC interfaces, USARTs, SPIs, I2S, TWIs and 10bit ADC.
  • Consists of SAM9X35 400MHz CPU external memory DDR2-SDRAM (1Gb) NAND flash (2 or 4Gb)
  • Three USB ports and two high speed SD/MMC interfaces
  • HS (EHCI) and FS (OHCI) host, multiplexed with HS USB device via micro AB connector
  • HS (EHCI) and FS (OHCI) host, via standard type A connector
  • FS only (OHCI) host, via standard type A connector
  • One Ethernet 10/100 interface with On board MAC controllers and RJ45 sockets
  • One stereo CODEC interface with line-in and headphone jacks
  • Two CAN interfaces and three serial interfaces (2x USART, 1x UART)
  • One telephone/modem interface with RJ11 connector and one TFT-LCD module interface
  • One Two Wire Interface (TWI) and one ZigBee extension port
The board must not be subjected to high electrostatic potentials. In risky ESD environments a grounding strap or similar protective device should be worn when handling the board.
One optional display module.

 

Product Information

Silicon Manufacturer:
Atmel
Accessory Type:
Core Architecture:
ARM
For Use With:
Core Sub-Architecture:
ARM926
Silicon Core Number:
SAM9X
Silicon Family Name:
AT91SAM9xxx
No. of Bits:
32bit
Kit Contents:
Evaluation Kit for AT91SAM9X35
Product Range:
-
Features:
400MHz CPU, Graphics LCD Controller, Serial Interface
SVHC:
No SVHC (15-Jun-2015)

Find similar products  grouped by common attribute

Applications

  • Industrial;
  • Automation & Process Control;
  • Consumer Electronics;
  • Sensing & Instrumentation;
  • Communications & Networking

Contents

One EK board with SAM9X35-CM CPU module, universal power supply with US, Europe and UKplug adapters, one 3V Lithium battery CR1225, one serial RS232 cable, one micro A/Btype USB cable, one RJ45 crossed cable.

Notes

One optional display module.

Legislation and Environmental

Product Traceability
RoHS Compliant:
Yes

Associated Products

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.