Low

AT91SAM9260B-CU - 

ARM Microcontroller, ARM Thumb, ARM9, 32bit, 210 MHz, 32 KB, 8 KB, 217 Pins

The actual product may differ from image shown

Manufacturer:
MICROCHIP MICROCHIP
Manufacturer Part No:
AT91SAM9260B-CU
Newark Part No.:
68T5228
Product Range
SMART ARM based Microcontrollers
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
96I/O's
:
32bit
:
210MHz
:
Each
:
217Pins
:
ARM9
:
EBI, EMI, ENET, I2C, SPI, SSC, UART, USART
:
BGA
:
1.65V
:
32KB
:
SMART ARM based Microcontrollers
:
1.95V
:
8KB
:
MSL 3 - 168 hours
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The AT91SAM9260B-CU is a SMART 32-bit Embedded Microcontroller based on the integration of an ARM926EJ-S processor with fast ROM and RAM memories and a wide range of peripherals. The SAM9260 is architectured on a 6-layer matrix, allowing a maximum internal bandwidth of six 32-bit buses. It also features an External Bus Interface capable of interfacing with a wide range of memory devices.
  • 180MHz ARM926EJ-S ARM Thumb processor
  • ITU-R BT. 601/656 Image sensor interface (ISI)
  • USB device and USB host with dedicated on-chip transceiver
  • 10/100Mbps Ethernet MAC controller (EMAC)
  • One high speed memory card host
  • Two master/slave serial peripheral interfaces (SPI)
  • Two 3-channel 32-bit timers/counters (TC)
  • One synchronous serial controller (SSC)
  • One two-wire interface (TWI)
  • Four universal synchronous/asynchronous receiver/transmitters (USARTs)
  • Two UARTs
  • 4-channel 10-bit ADC
  • 90MHz six 32-bit Layer AHB bus matrix
  • 22 Peripheral DMA channels
  • Boot from NAND flash, dataflash or serial dataflash
  • Reset controller (RSTC) with on-chip power-on reset
  • Two programmable external clock signals
  • Advanced interrupt controller (AIC)
  • Debug unit (DBGU)
  • Periodic interval timer (PIT)

Applications

Automation & Process Control

Associated Products