Low

AT17LV010-10PU - 

FPGA Configuration Memory, EEPROM, 1 Mbit, 33 MHz, 2 Wire, DIP, 8 Pins

MICROCHIP AT17LV010-10PU

The actual product may differ from image shown

Manufacturer:
MICROCHIP MICROCHIP
Manufacturer Part No:
AT17LV010-10PU
Newark Part No.:
68T4036
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
1Mbit
:
-40°C
:
Each
:
85°C
:
2 Wire
:
33MHz
:
8Pins
:
EEPROM
:
DIP
:
3V
:
-
:
5.5V
:
-
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The AT17LV010-10PU is a 1MB FPGA configuration EEPROM provides easy-to-use, cost-effective configuration memory for FPGAs. This EEPROM can configure one or more FPGA devices through a simple serial-access procedure. Users can select the polarity of the reset function by programming four EEPROM bytes. The device also supports a write-protection mechanism within its programming mode. It can be programmed with industry-standard programmers, the Atmel ATDH2200E programming kit or the Atmel ATDH2225 ISP cable. Compatible with the Atmel® AT6000, AT40K and AT94K Devices, Altera® FLEX®, APEX™ Devices, ORCA®, Xilinx® XC3000, XC4000, XC5200, Spartan® and Virtex® FPGAs.
  • In-System Programmable (ISP) via 2-wire bus
  • Simple Interface to SRAM FPGAs
  • Cascadable read-back to support additional configurations or higher-density arrays
  • Very low-power CMOS EEPROM process
  • Programmable reset polarity
  • Emulation of the Atmel AT24CXXX serial EEPROMs
  • Low-power standby mode
  • High-reliability

Applications

Motor Drive & Control, Consumer Electronics, Lighting, Industrial

Warnings

ESD sensitive device, take proper precaution while handling the device.