Low

ANALOG DEVICES  ADZS-BF518F-EZBRD  Evaluation Board, Ethernet, 32bit, Standalone Debug Agent Board

ANALOG DEVICES ADZS-BF518F-EZBRD

Image is for illustrative purposes only. Please refer to product description.

Product Overview

The Blackfin BF518F EZ-board evaluation-board provides developers with a low-cost platform for initial evaluation of the ADSP-BF512/F, BF514/F, BF516/F, BF518/F Blackfin processors via an external JTAG emulator or standalone debug agent board. The EZ-board also supports uClinux. Note: To debug user must have a Debug Agent board or Emulator. The EZ-board has an expansion interface that allows for modularity with different EZ-Extender boards.
  • ADSP-BF518F: 400MHz, 176 lead LQFP
  • SDRAM: 64MB, 32M x 16, Micron MT48LC32M16A2TG,3.3V
  • FLASH: 4MB (2M x 16 ), Numonyx M29W320DB 3.3V, FBGA48
  • SPI FLASH: 4Mb on-chip SPI 1.8V
  • Audio CODEC: ADI SSM2602 CODEC 3.3Volts, 12MHz input
  • A/D Converter: AD7266, Differential/Single-Ended Input, Dual 2MSPS, 12bit 3 Channel
  • Power Analysis Interface: Precision resistors to measure VDDINT, VDDEXT, VDDMEM, VDDFLASH
  • Ethernet PHY: National Semiconductor 10/100 Single Port PHY
  • LEDs: 13 LEDs: 1 power (green), 1 board reset (red), 3 general purpose (amber), 8 Ethernet (amber)
  • RTC battery: 3.0Volt Li-ION, CR2430 (270mAh), Connectors: Ethernet, SD, EBIU expansion
ESD sensitive
This board should not be used in or near any medical equipment or RF devices.

 

Product Information

Silicon Manufacturer:
Analog Devices
Accessory Type:
Core Architecture:
Blackfin
For Use With:
Core Sub-Architecture:
Blackfin
Silicon Core Number:
ADSP-BF518F
Silicon Family Name:
Blackfin
No. of Bits:
32bit
Kit Contents:
Board only
Product Range:
-
Features:
JTAG Emulator or Standalone Debug Agent Board
SVHC:
No SVHC (17-Dec-2015)

Find similar products  grouped by common attribute

Applications

  • Audio;
  • Imaging, Video & Vision;
  • Signal Processing;
  • Communications & Networking;
  • Automotive

Contents

ADSP-BF518F EZ-Board, VisualDSP++ Installation Quick Reference Card, CD containing: VisualDSP++ software, ADSP-BF518F EZ-Board debug software, USB driver files, Example programs, ADSP-BF518F EZ-Board Evaluation System Manual, Universal 5.0V DC power supply, 256 MB SD card, 7 foot Ethernet patch cable, Two 6 foot 3.5 mm male to male audio cables

Notes

This board should not be used in or near any medical equipment or RF devices.

Legislation and Environmental

Associated Products

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.