KEYSIGHT TECHNOLOGIES  34921A  Test Accessory, Armature Multiplexer, Keysight 34980A Mainframe

Technical Data Sheet (1.57MB) EN See all Technical Docs

The actual product may differ from image shown

Product Overview

The 34921A is a Multiplexer Module with 40-channel armature multiplexer with low thermal offset. The multiple multiplexers can connect to the built-in analog buses, allowing scanning up to 560 2-wire channels or 640 1-wire channels in a single mainframe. Also offers 4-channels for directly measuring current. If needed more current channels, shunts can be added to the terminal block for easy current measurements. This multiplexer module features break-before-make connections to ensure that no two signals are connected to each other during a scan. Or, if prefer, can control switching manually to create your own switch configuration. All the multiplexer switches have a relay counter to help predict when relays need to be replaced.
  • Analog bus backplane connection
  • 40 2-wire, 20 4-wire, 4-current and 1.5A fused channels/configurations
  • Armature latching switch type
  • 60W Power rating (limited to 6W of channel resistance power loss per module)
  • <1.5Ω Initial closed channel resistance
  • >10GΩ DC Isolation (ch-ch, ch-earth)
  • 100ch/s Scanning speeds
  • 4ms/4ms Open/close time, typical


Product Information

Accessory Type:
Armature Multiplexer
For Use With:
Keysight 34980A Mainframe
Product Range:
To Be Advised

Find similar products  grouped by common attribute


  • Test & Measurement

Legislation and Environmental

Authorized Distributor


Associated Products

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.