Low

ADAFRUIT INDUSTRIES  955  STARTER PACK, RASPBERRY PI

Image is for illustrative purposes only. Please refer to product description.

ADAFRUIT INDUSTRIES 955
Video

Product Overview

The 955 is a Raspberry Pi Model B starter pack. It includes everything needed to start with Raspberry Pi Model B single board computer.
  • Pi Case keeps user Pi snug and safe, and is compatible with the GPIO cable and cobbler
  • USB Micro-B cable used to power the Pi from a computer or 5V 1A adapter
  • Power adapter is custom made specifically for use with embedded Linux machines like the Pi
  • 4GB SD card works perfectly with reader provided and is ideal for loading in educational Pi distro
  • USB microSD card reader for loading image onto SDcard. No drivers required
  • Ethernet cable to make user project net-connected as the Pi comes with built in Ethernet
  • Embroidered Raspberry Pi badge

Applications

Embedded Design & Development; Hobby & Education

Contents

3inch long USB micro-B cable, 5V 1A power adapter, USB TTL console cable, 4GB SD card with preinstalled with Raspbian Wheezy, Adafruit Pi cobbler with GPIO cable, Large full size breadboard, Adafruit Pi case, Male/male jumper wires, USB Wi-Fi module, Embroidered Raspberry Pi badge, One photo cell, Five 10K resistors, Five 560 ohm resistors, Three diffused 10mm blue, green and red LEDs, One electrolytic capacitor, 3x 12mm tactile switches.
This pack does not include Raspberry Pi Model B board.

Customers Also bought

Product Information

Accessory Type:
Starter Pack
For Use With:
Raspberry Pi
Product Range:
-
Kit Contents:
Pi Box, AC Adapter, Cables, SD Card, microSD Reader, Pi Cobbler, Breadboard
Features:
Burn Adafruit Hacking Distro to SD Card
SVHC:
To Be Advised

Find similar products  grouped by common attribute

Legislation and Environmental

Applications

  • Embedded Design & Development;
  • Hobby & Education

Contents

3inch long USB micro-B cable, 5V 1A power adapter, USB TTL console cable, 4GB SD card with preinstalled with Raspbian Wheezy, Adafruit Pi cobbler with GPIO cable, Large full size breadboard, Adafruit Pi case, Male/male jumper wires, USB Wi-Fi module, Embroidered Raspberry Pi badge, One photo cell, Five 10K resistors, Five 560 ohm resistors, Three diffused 10mm blue, green and red LEDs, One electrolytic capacitor, 3x 12mm tactile switches.

Notes

This pack does not include Raspberry Pi Model B board.

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.

Recently Viewed

Product Recommendations