Low

ADAFRUIT INDUSTRIES  1326  CASE ENCLOSURE, FOR RASPBERRY PI MODEL A OR B

ADAFRUIT INDUSTRIES 1326
ADAFRUIT INDUSTRIES 1326
ADAFRUIT INDUSTRIES 1326
ADAFRUIT INDUSTRIES 1326
Technical Data Sheet (557.57KB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

ADAFRUIT INDUSTRIES 1326
ADAFRUIT INDUSTRIES 1326
ADAFRUIT INDUSTRIES 1326
ADAFRUIT INDUSTRIES 1326

Product Overview

The 1326 is an enclosure for Raspberry Pi Model A or B. This Adafruit Pi case can be used very easily and works with Raspberry Pi Model A, Model B rev 1 and Model B rev 2. Snap the Pi into case bottom for a secure press fit. If user wants to poke around, can leave the top cover off. If user wants to protect Pi, fit the cover on. It will fit securely so user can put the Raspberry Pi into book bag without worry. There is a slot for GPIO ribbon cable so user can connect Pi cobbler while cover is still on and remove it easily as well by popping top off.
  • Weight of 46.62g
  • Dimensions of 68.4mm x 102.29mm x 24.18mm (2.69inch x 4inch x 0.95inch)
This enclosure is not compatible with the Raspberry Pi Model B+ board.

 

Product Information

Accessory Type:
Pi Case Enclosure
For Use With:
Raspberry Pi Model A or B
Product Range:
-
Features:
Adafruit Pi Case-Enclosure for Raspberry Pi Model A or B
SVHC:
To Be Advised

Find similar products  grouped by common attribute

Notes

This enclosure is not compatible with the Raspberry Pi Model B+ board.

Legislation and Environmental

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.