Low

3M  SKE25/63-HDEC  Heat Shrink Boot, Molded Heavy Duty, End Cap, 2.48 ", 62.99 mm, Black, 5.63 ", 143 mm

3M SKE25/63-HDEC
Technical Data Sheet (32.43KB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

Product Overview

The SKE25 series heat shrink heavy duty End Caps rapidly shrinks, forcing the melted adhesive lining to flow and cover the substrate. The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. Upon cooling, the adhesive solidifies, forming a permanent, non-drying, flexible and water resistant barrier. Adhesive reflow will occur at temperatures above 80°C (176°F). Heat shrinkable end caps are typically used to seal cable ends and provide mechanical and environmental protection. These are made of flexible flame retardant polyolefin.

 

Product Information

Boot Configuration:
End Cap
I.D. Supplied - Imperial:
2.48"
I.D. Supplied - Metric:
62.99mm
Shrink Tubing / Boot Colour:
Black
Total Length - Imperial:
5.63"
Total Length - Metric:
143mm
I.D. Recovered Max - Imperial:
0.98"
I.D. Recovered Max - Metric:
24.89mm
Shrink Tubing / Boot Material:
PO (Polyolefin)
Shrink Ratio:
-
Product Range:
SKE25 Series
Wall Thickness Recovered:
3.3 mm
RoHS Compliant:
Yes
Body Material:
Polyolefin
I.D. Max Recovered:
24.89 mm
Colour:
Black
SVHC:
To Be Advised
I.D. Supplied:
62.99 mm

Find similar products  grouped by common attribute

Applications

  • Thermal Management;
  • Industrial

Also Known As

GTIN UPC EAN: 00051138481568

Legislation and Environmental

RoHS Compliant:
Yes
Authorized Distributor

Associated Products