Low

3M  FP-301 3/16" BL 100'  Heat Shrink Tubing, 4.75 mm, 0.187 ", 2:1, Black, 100 ft, 30.5 m

3M FP-301 3/16" BL 100'
Technical Data Sheet (47.46KB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

Product Overview

The FP-301 3/16" BL 100' is a Heat-shrink Thin-wall Tubing offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. This tubing is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire-resistant covering. It has a 2:1 shrink ratio, when freely recovered the tubing will shrink to 50% of its as-supplied internal diameter. The recovered wall thickness is proportional to the degree of recovery.
  • Split-resistant tubing
  • Mechanically tough
  • Easily marked and resists cold flow

 

Product Information

I.D. Supplied - Metric:
4.75mm
I.D. Supplied - Imperial:
0.187"
Shrink Ratio:
2:1
Shrink Tubing / Boot Colour:
Black
Length - Imperial:
100ft
Length - Metric:
30.5m
I.D. Recovered Max - Metric:
2.36mm
I.D. Recovered Max - Imperial:
0.093"
Shrink Tubing / Boot Material:
PO (Polyolefin)
Product Range:
FP301 Series
Wall Thickness Recovered:
0.51 mm
Total Length - Metric:
30.48 m
Shrink Type:
Heat
RoHS Compliant:
Yes
Body Material:
Polyolefin
I.D. Max Recovered:
2.36 mm
Total Length - Imperial:
100 ft
Colour:
Black
SVHC:
To Be Advised
I.D. Supplied:
4.75 mm

Find similar products  grouped by common attribute

Applications

  • Industrial;
  • Defence, Military & Aerospace

Also Known As

GTIN UPC EAN: 00051135355688

Legislation and Environmental

Product Traceability
RoHS Compliant:
Yes
Authorized Distributor

Associated Products