Low

CTC331-WW - 

ESD Tester, LED, 22 mm, 61 mm

The actual product may differ from image shown

Manufacturer:
SCS SCS
Manufacturer Part No:
CTC331-WW
Newark Part No.:
42M0728
Product Range
DOWN to EARTH™ Series
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
61mm
:
22mm
:
LED
:
-
:
-
:
-
:
-
:
DOWN to EARTH™ Series
:
-
:
63mm
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The CTC331-WW is an Iron Man Plus Workstation Monitor with world wide power adapter. It continuously monitors the resistance between ground and the ESD work surface. The dissipative work surface must be grounded using the recommended means. It does not ground dissipative surfaces, it only monitors proper grounding of such surfaces. If the resistance of the conductive path from such dissipative surface to ground exceeds the threshold, the alarm will activate. There is a slight delay in time before the alarm activates. The alarm level can be adjusted for low or high ranges. This setting is selected by moving an internal jumper socket inside the unit. It will respond to either a positive or negative voltage. If the voltage is higher than the pre-set level, a visual red LED and audible alarm are activated. The alarm will be on for at least 1 second. If the voltage level is below the pre-set alarm level, a green LED lamp remains on.
  • Overvoltage monitor
  • Mat monitor
  • Wrist strap monitor
  • Monitors a voltage level that is being generated on a printed circuit board while working on it
  • Monitors resistance to ground of a conductive or dissipative static control type of work surface
  • Monitors resistance and voltage on a dual conductor wrist strap while being worn by a person

Applications

Test & Measurement, Industrial

Contents

Iron Man Plus Workstation Monitor, PCB Cord with Alligator clip (yellow), Monitor ground cord (green and yellow), Power adapter with interchangeable plugs (North America, UK/Asia, Europe) and Certificate of calibration.